TWINTURBOV8
Member
Hi I was wondering if anybody knows where I could get a good crank one that handles up 800 horsepower and maybe some good headers to thanks any help would be nice.
Crank
- Thread starter TWINTURBOV8
- Start date
autoaddictions
Active member
Re: Crank
I can get you a Billet crank for 3000.00 Any stroke you want. 6 to 8 weeks lead time.
I can get you a Billet crank for 3000.00 Any stroke you want. 6 to 8 weeks lead time.
midnightbluS10
Banned
Re: Crank
Sytyperformance.com
Sytyperformance.com
TWINTURBOV8
Member
92TyLA
New member
Re: Crank
Can we get a bigger pic?, we like pics that include chiks and sytys since theres not that many around and all the squareness of sytyscan sure use some curves :tup:
Autoaddictions knows his stuff, just look at his builds, and Mike at RPM will treat you right as well. Good luck and keep us posted about your 800hp monster build
Not to highjack your thread but....
Can we get a bigger pic?, we like pics that include chiks and sytys since theres not that many around and all the squareness of sytyscan sure use some curves :tup:
Autoaddictions knows his stuff, just look at his builds, and Mike at RPM will treat you right as well. Good luck and keep us posted about your 800hp monster build
Last edited:
Re: Crank
Are you in Edmonton, AB?
If so go see Nolan @ Campbell Automotive....or Moretto Motorsports I think it is now.
Are you in Edmonton, AB?
If so go see Nolan @ Campbell Automotive....or Moretto Motorsports I think it is now.
SEL777
One of 101
johnboy89
Member
Re: Crank
Campbell Automotive is where I ordered my SCAT crank from, they are in the Vendors section.
Campbell Automotive is where I ordered my SCAT crank from, they are in the Vendors section.
Last edited:
fivetodrive
CRISPY
Re: Crank
I have a complete bowtie block with a 4.0 bore, sonic checked, forged moldex crank stock stroke, Stock length oliver rods, JE 4.0 bore piston combo that I have been debating on letting go,
I have a complete bowtie block with a 4.0 bore, sonic checked, forged moldex crank stock stroke, Stock length oliver rods, JE 4.0 bore piston combo that I have been debating on letting go,
wildphil
I Love My Ty's
Re: Crank
Do they make a forged crank? I did know that they had a crank that is supposed to be stronger than stock. I plan on using one. If the need ever arises.
http://www.flatlanderracing.com/scat-crankkits-chevy.html
Do they make a forged crank? I did know that they had a crank that is supposed to be stronger than stock. I plan on using one. If the need ever arises.
http://www.flatlanderracing.com/scat-crankkits-chevy.html
wildphil
I Love My Ty's
Re: Crank
I saw this at the Flatlander Racing site. It says you have to buy 3 cranks, But if the price was right and a group buy was put together. Maybe it would work out.
I wonder if the crank was cut to use SBC rods. Would that work on our engines?
http://www.flatlanderracing.com/custom-cranks.html
I saw this at the Flatlander Racing site. It says you have to buy 3 cranks, But if the price was right and a group buy was put together. Maybe it would work out.
I wonder if the crank was cut to use SBC rods. Would that work on our engines?
http://www.flatlanderracing.com/custom-cranks.html
TWINTURBOV8
Member
Re: Crank
Thanks for the help guys.
Thanks for the help guys.
Throws
Active member
johnboy89
Member
Re: Crank
The OP is looking for a crank that will handle 800 hp!!!!!! I can't imagine that this will do it, but for a stock replacement I can't see why not. I used one in my build and haven't had any issues with it. I researched when I bought mine for failures, but couldn't find any. It might be that there is not enought people using them???
The OP is looking for a crank that will handle 800 hp!!!!!! I can't imagine that this will do it, but for a stock replacement I can't see why not. I used one in my build and haven't had any issues with it. I researched when I bought mine for failures, but couldn't find any. It might be that there is not enought people using them???