Datamaster boost vs guage boost readings

bshaw1979

New member
Ive been having knock issues for awhile now. I finally got my wideband and data master hooked up. My ty is pretty much all stock other than a turbo tweak velocity chip, catback, cold air intake. My issue is on data master it shows my boost never going above 10psi. While on my boost gauge it shows around 14-15psi. I'm guessing this is contributing to my knock . Anyone ever run into this? Does this sound like a chip issue? When i ordered the chip i specified 3 bar map...maybe its calibrated for the wrong map i don't know..Im just stumped and don't know where to go from here. Any help would be appreciated ..
 
Re: Datamaster boost vs guage boost readings

Are you going by an aftermarket gauge, or the factory gauge? If the latter it's very inaccurate.
 

randy merritt

Donating Member
Re: Datamaster boost vs guage boost readings

Ive been having knock issues for awhile now. I finally got my wideband and data master hooked up. My ty is pretty much all stock other than a turbo tweak velocity chip, catback, cold air intake. My issue is on data master it shows my boost never going above 10psi. While on my boost gauge it shows around 14-15psi. I'm guessing this is contributing to my knock . Anyone ever run into this? Does this sound like a chip issue? When i ordered the chip i specified 3 bar map...maybe its calibrated for the wrong map i don't know..Im just stumped and don't know where to go from here. Any help would be appreciated ..
You need to set Datamaster to read a 3 bar chip. Under "setup" then "display units" make sure the 3 bar map box is checked. If not, it will read low. This should be the answer. As soon as you check the 3 bar map, the boost readings in DM will go up and should match your gauge. HTH.
 

bshaw1979

New member
Re: Datamaster boost vs guage boost readings

You need to set Datamaster to read a 3 bar chip. Under "setup" then "display units" make sure the 3 bar map box is checked. If not, it will read low. This should be the answer. As soon as you check the 3 bar map, the boost readings in DM will go up and should match your gauge. HTH.

I will try that asap...Thanks for the help man..Hope thats it. As for the knock thats another issue.lol
 
Top