ItsMyTy
Life is beter at 25 PSI
Just wanted to share this with everyone that's having datamaster errors and communication problems. It's been said many times, but check your
IGNITION!!!
I have a set of ATR plugwires on my Ty, about 10 months old, and the truck seemed to be running well. No misfires, running great at the track. Datamaster would have communication loss every 10 seconds or so, and reconnect after a second or so. Since I just made my own datamaster cable, I thought my cable was not as good as a TTS cable and I was gonna have to deal with the errors.
Fast forward to tonight... Truck dies going down the road, tach fluttering all over the place before I roll to a stop. Bad coil wire, won't even fire back up. Repaced the coil wire. Runs the same as before it died... but now, no communication errors at all in datamaster!!! Just because you have new wires doesn't mean they aren't bad... Lesson learned (and i'm keeping a spare coil wire in the console just in case...)
though this might help somebody
IGNITION!!!
I have a set of ATR plugwires on my Ty, about 10 months old, and the truck seemed to be running well. No misfires, running great at the track. Datamaster would have communication loss every 10 seconds or so, and reconnect after a second or so. Since I just made my own datamaster cable, I thought my cable was not as good as a TTS cable and I was gonna have to deal with the errors.
Fast forward to tonight... Truck dies going down the road, tach fluttering all over the place before I roll to a stop. Bad coil wire, won't even fire back up. Repaced the coil wire. Runs the same as before it died... but now, no communication errors at all in datamaster!!! Just because you have new wires doesn't mean they aren't bad... Lesson learned (and i'm keeping a spare coil wire in the console just in case...)
though this might help somebody