Datamaster file while driving, BOY am i confused!!!

vinnieTy

TY # 1889
Okay guys i need your help.........i did my first run with datamaster last night and something is wrong. My aftermarket boost gauge on the POD is reading 13 pounds of boost. The stock one goes and pings itself after 15 PLUS Pounds of boost. As for datamaster im hitting 23 pounds of boost. Before people start calling me names(HAHA) let me tell you what mods i have and what i have done..

3inch cat back exhaust
kenne bell intake
ATR chip which i installed last week. Of course i plan on removing this chip andgoing back to stock and trying datamaster again but that will be later this week.

Now before this chip the truck ran great. After the chip it ran just as well. Of course some more power but nothing crazy. I dont think anything for 23LBS of boost.

PLease look at the screen shot i did and let me know what you think. I also have the file but how do i share it? Does photobucket allow me to share it.
I also noticed that the log says i have a 3 bar map sensor??? I wasnt aware of that. Is there a way i can tell between a 2 bar and a three bar map?

Anyway thanks in advance for the help.:tup:

datamasterfilewhiledriving.png
 

wheels

Donating Member
Re: Datamaster file while driving, BOY am i confused!!!

In DM go to setup>display units and Map calibration should be OEM
 

sytyguy

Moderated User
Re: Datamaster file while driving, BOY am i confused!!!

What Ryan said. With DM set to 3bar it will misreport the actual boost. Odds are that you're seeing 13ish lbs of boost and the stock gauge is just a little inaccurate (not uncommon).

Also (and this is just advice), I'd set your graph items to be RPM (Red), Spark Retard (Black), TPS (Blue), and Boost (Pink). Makes for a cleaner graph and you can see the knock show up as you're driving. The graph you have looks like 4 different EKGs overlaid.
 

vinnieTy

TY # 1889
Re: Datamaster file while driving, BOY am i confused!!!

Thanks guys I will work on the graph and look into the setup like ryan stated. Two questions how can i post up my log file for others to view and two the knock should it be zero?? I see datamaster has knock 16 and knock 8 can someone explain to me alittle bit. I want to make sure the chip i installed is okay. I get scared of all the BOOm need to rebuild comments i hear.
 
Re: Datamaster file while driving, BOY am i confused!!!

I think what you want is spark retard. It should be right above knock 8 and 16.
 

johnboy89

Member
Re: Datamaster file while driving, BOY am i confused!!!

Thanks guys I will work on the graph and look into the setup like ryan stated. Two questions how can i post up my log file for others to view and two the knock should it be zero?? I see datamaster has knock 16 and knock 8 can someone explain to me alittle bit. I want to make sure the chip i installed is okay. I get scared of all the BOOm need to rebuild comments i hear.

If you go to http://powertuneplus.com/ they have a section on there that goes over basics for datamaster, helped me alot recently.
 

djwaggoner

New member
Re: Datamaster file while driving, BOY am i confused!!!

Several guys have posted DM files on Photobucket.
However, they're UNI files, and I've been unsuccessful in viewing them after downloading...what App are folks using to view the UNI files??
TIA
 

vinnieTy

TY # 1889
Re: Datamaster file while driving, BOY am i confused!!!

I tried posting a file on photobucket and it doesnt work. Now unless there is a setting i need to choose but as of now i tried a few times no luck.
 
Top