datamaster file

Ryda85

Senior Member
i just started the truck with the new mods and it says my iats are over 200....is that possible?
 

SBNova

New member
Re: datamaster file

Its not likely, but if you started it, shut it down and let it sit it could heat soak to that high of a temp. If it was a cold start with IAT's of 200 then there is something wrong.
 

Ryda85

Senior Member
Re: datamaster file

yea it was a cold start...i dont get it...what would cause the iats to read over 200
 

Don W.

Stab it and steer it
Re: datamaster file

Any codes? Check resistance across sensor terms. Should be less than 185. 185 = 210*. Let it sit overnight so no false readings. 70* = 3,400 ohms. If not in this range, prolly bad sensor. Also check with key on and engine off that you have 4 volts or more at harness connection. All the above from the manual. Let us know what you find.
 
Top