DataMaster help.

UK-Ty

Ty Crazy
Hi all after getting my datamaster up and running i went for a drive to see how it works and found a couple of things im not happy with:(.
The first was the spark retard topped out at 12.1 (i've not drove it since finding this out)
I've changed plugs cap rotor leads and fuel filter but not had chance to get it on the DM to see if its made any difference yet.
The second is the AFR tgt which ranged from 10.1 at start up to 14.7
At WOT its 13.0 but at one point it spiked to 14.7 then went back to 13.0
It has a atr stock chip with 30# injectors as far as i know its stock apart form this.
At WOT boost rangers from 13.9 to 15psi
I would post a pic of my DM read out but dont know how.

I go to sleep with DataMaster running through my head. It must be an SyTy thing:lol:
 

JSM

Active member
Re: DataMaster help.

Afr Target doesn't mean much on a stock chip to someone just getting into things. If you were real deep into it, making changes maybe.

If you do the hack to display wideband o2 (if you have one installed, and hooked to f14) then it can display actual AFR. In stock chip form not much info.
 

bezerk

New member
Re: DataMaster help.

check your mVolts.. wot shoud be in the 900mv range. that's about as much you can do with the stock o2 sensor. might be your feulpump going bad
 

ghettosled

SYTY SUPERSTORE
Re: DataMaster help.

Dooky has some pretty good info on datamaster

http://www.powertuneplus.com/syclone/tunersguide_dm.shtm

May want to consider unplugging the electronic boost selenoid until you can get it running with 0 knock retard. If you run 8psi vs 15psi and dont see a drastic reduction in spark retard it could be false knock. Assuming you have a stock chip 02 volts and your MATs would be a good thing to look at. Would let you know if the fuel pump is dying or the intercooler pump is not working.
 
Top