Datamaster KR WOW!!!

cheatham2492

New member
Just been tuning a buddys truck with a romulator. Everything was fine then the the volts whent to 11.00 from 14.0 and the KR whent crazy!!! counts by the thousands. so when we drive it it pulls every bit of timing out of it to zero. Any body ever seen this?????
thanks Dan
Ps replacing the alt as we speak.
 

Bill Z

Donating Member
Re: Datamaster KR WOW!!!

Tell us more.

Does it stay at 11 volts at higher RPMs? Or does ti go back to 14 volts?

What do you think got turned on that caused the voltage drop?

Are you running an underzed crank pully?
 

jwaller

Evil Genius/SyTy Guru
Re: Datamaster KR WOW!!!

you got issues. time to start digging around under the hood.
 

cheatham2492

New member
Re: Datamaster KR WOW!!!

No batt relocate,but he dose have the low impedence injector drivers.We replaced the Alt and that seem to cure everything. Was really wierd though. 11.0 volts on the DM and KR was like a ticker tape.thanks for all the help
Dan
 
Last edited:

dgoodhue

BuSTeD 4.3
Re: Datamaster KR WOW!!!

4 degree of KR is sort of the default value, if you unplug the KS it will show 4 degrees of KR all the time.
 
Top