De-puck turbo???

TYHOGG

TYHOGG

Active member
Is there any adverse affects to doing this? From what i understand you have to adjust the acuator rod a little but its supposed to give the turbo more upper end. I know i will need a custom flange on the dp, but while i'm getting a new dp and cat installed i thought i might be worth while.

Thanks for the help guys,
Adam
 
Divergent Lightning

Divergent Lightning

woah
Re: De-puck turbo???

All you have to do is grind off the three welds on the puck and the weld a bolt to it and twist it out. Not to hard but depending on the age of your turbo and the amount of rust on it, it could make it alot harder.
 
TYHOGG

TYHOGG

Active member
Re: De-puck turbo???

I am definitly going this route, boost control is better and it sounds like to gives the turbo better flow upper end for more power.

Turbo is brand new so it should be easy
 
Divergent Lightning

Divergent Lightning

woah
Re: De-puck turbo???

good luck with it. do you have a flange to direct the exhaust flow from that puck? It isn't just the wastegate, it is the whole exhaust flow as well...
 
You must log in or register to reply here.
Top