devided vs undevided turbine housings

myclone

Donating Member
I was having a discussion with the supra/co-worker in my sig yesterday about which would spool faster if the turbine housing was sized too large for a given engine. It wasnt an arguement just discussing it.

IMO a devided would prolly spool faster/better as the devided housing would keep the exhaust velocity up better than an undevided housing. Correct? Im a tard? Hes a tard?

Now on the other hand if the turbine housing was better matched to the same engine combo a undevided housing would prolly spool better AND not become a restriction at the upper RPM ranges. Correct? Im a tard on this one too? Hes a tard and Im right?

Opinions?
 

myclone

Donating Member
who gives a fuck? I would think a buncha ppl that own and are into modding turbo vehicles would want to know or at least have thoughts/ideas. Which way would be "right"? Calling someone up with a credit card # and have them send me what everyone else is buying? :roll:

Oh, I keep forgetting... I gotta keep these questions more in tune with what constitutes a major mod around here..

New question. What color lugs nuts should I get? Which ones will look "phat" since going faster and possibly learning something new isnt really what I want. :roll:
 

myclone

Donating Member
t4_hs.jpg
 

myclone

Donating Member
bdubb said:
what year supra, and 6 speed, or auto?

90/5spd according to the owner.. Dunno myself as I have yet to wander out to the parking lot he parks it in to look. Why? You trying to set me up for an arguement/bashfest? :wink: Aint gonna happen cause I know AND you know that I know that I dont know shit about supras.

Which lug nuts? Devided or undevided? :p
 

bdubb

I am teh kingpin!
i wouldn't be too worried at all. those things are pigs and are dyno queens. they cant move as simple as the MKIV supras.
 

nightdiver

Active member
I could never notice a diff between these two . A Mitsu turbo will spool faster than a Garrett from what ive seen .I did my first turbo mod in 1988...... 8)
 

myclone

Donating Member
bdubb said:
i wouldn't be too worried at all. those things are pigs and are dyno queens. they cant move as simple as the MKIV supras.

No, no, no... Only reason we were talking about it is hes the ONLY person at work who owns a turbo vehicle besides me and he is also the only person I can talk turbo with thats local. It wasnt a race between him and I discussion it was me asking him what diff config turbos are like since he hangs out with the supra crowd. Look at my sig. I got him covered. :wink:
 

sy1907

SYCOTIC
I'm gonna have to go with the red lugs if possible, keepin with the whole scheme of the truck so it looks "tizzzight". I would tend to agree with you on the div and indiv comment though. Plus, using Boyle's gas chemistry law, Pv=nRt the divided brings volume down which would bring up the pressure inside the given extremity. :D
 

BigAl...

Member
As I understand it divided housings work best on 4 cylinder engines but have been used on some 6cyl apps, cyl 1,4 go into one scroll and cyl 2,3 go into the other that way the turbine is hit with four distinct pulses. This is not from experience, just something I read.

BigAl...
 

vortecfiero

New member
some of the divided housings have 2 diff A/Rs, a small AR to help spool up faster and a large AR to help get strataspheric (big) boost, but its still a compromise.
 

ghettosled

SYTY SUPERSTORE
well you first want the correct a/r ratio. Sometimes certain housings only come in certain sizes, as you are probably well aware. The undivided housings flow a tad better then the divided and the tangential housings flow approx 4% more then the on center. From what I hear the divided housings would be used in an application where the exhaust gases pulse differently and the divider would help even them out as it entered the scroll of the turbine housing(they are popular amongst some of the high hp rotarys). Similar to a cylinder head, this does not increase flow but it helps velocity in some applications. IMHO from a performance standpoint the difference is not noticeable, so i dont think it will change your spool up. It's kinda like you find the correct a/r and take whatever is available in that size.
 

myclone

Donating Member
TURBO TY said:
so the divider is like a dual plane intake?

Id have to say yes in that is helps keep the velocity of the exhaust gasses higher where an undevided housing wouldnt "crutch" the flow of an over sized (for a given engine combo) exh housing as much. Thats only a slightly educated guess though since exh temp, cam, RPM, ignition timing, etc all play a role in spool up if I understand it at all correctly.
 
Top