Diacom Question RINDA ? Software Needed..

Inferno

New member
I recently got an awsome 92 Ty from a member here, he gave me a laptop with the vehicle with Diacom in it. I let someone use my truck and he put a toolbox ontop of the computer. needless to say the screen cracked and I can no longer use it. I still have the cables and another laptop. So I am hopeing someone can get me just the software, an maybe a sugestion for what to replace it with... any help is greatly appreciated...

Thanks in advance -Keith
 

KETCH-UP

New member
Re: Diacom Question RINDA ? Software Needed..

You can tap the vga output out of the back of the laptop to another screen. Then you should be able to copy the program to another machine.
 

dgoodhue

BuSTeD 4.3
Re: Diacom Question RINDA ? Software Needed..

They may send you a copy (all their copy protection is in their cable) or I can send you copy if I can find my disk this weekend.
 

Inferno

New member
Re: Diacom Question RINDA ? Software Needed..

I got a copy thanks to a member here, I am running Win Xp on my lappy.. When I goto "link" I get a "no cable connected" I tried all three ports as options, port one locks the screen up when I try it.. I am new to this.. is there an easy fix or ?!?!? thanks again everyone!
 

leroy

Donating Member
Re: Diacom Question RINDA ? Software Needed..

You could try to run it in Windows 95 compatibility mode. It still may not work with newer computers.

Jim
 

dgoodhue

BuSTeD 4.3
Re: Diacom Question RINDA ? Software Needed..

I have always run it in DOS, I Have tried a few time using it with Window 98 & 2000 and it never worked right.
 

turbodig

Active member
Re: Diacom Question RINDA ? Software Needed..

Inferno said:
I got a copy thanks to a member here, I am running Win Xp on my lappy.. When I goto "link" I get a "no cable connected" I tried all three ports as options, port one locks the screen up when I try it.. I am new to this.. is there an easy fix or ?!?!? thanks again everyone!


Must boot to DOS... I've had no luck in 95/98/2k/XP.

Pick yourself up a 256M flash memory stick, install DOS to it, then the Rinda software.
When you want to run Diacom, boot from the stick, otherwise, from the laptop as normal.

I do this with Directscan on the Buick...
 

SpoolingTurbo6

Donating Member
Re: Diacom Question RINDA ? Software Needed..

How do you boot to the Flash drive?Do you hold down a key during start up?
I'm working on making a Flashdride Hard Drive with 10 X 2 gig
flash drives. similar to this
remoteImage.jpg
 

Inferno

New member
Re: Diacom Question RINDA ? Software Needed..

awsome Idea... I need to get this going soon, my ty has been pissin me off lately. Will try tomorrow...


and spoolin, you should clear your PM's :)
 

turbodig

Active member
Re: Diacom Question RINDA ? Software Needed..

SpoolingTurbo6 said:
How do you boot to the Flash drive?Do you hold down a key during start up?
I'm working on making a Flashdride Hard Drive with 10 X 2 gig
flash drives. similar to this
remoteImage.jpg


Depends on how old your machine is... most things built in the last 3-4 years will boot from a usb memory stick.

Go buy a cheapie 128M stick, format it FAT(bootable), install DOS to it, and then install whatever DOS SW you need. You can actually do a small install of Win98 this way, 98lite (www.litepc.com) works great for this.

Dunno about a Mac, though. :)

Later,
 

SpoolingTurbo6

Donating Member
Re: Diacom Question RINDA ? Software Needed..

not a mac question just wondering how to get the pc lap top to boot up to usb flash drive?
Ahhhhhh! you open the DOS propt ? RIGHT ?
 

turbodig

Active member
Re: Diacom Question RINDA ? Software Needed..

SpoolingTurbo6 said:
not a mac question just wondering how to get the pc lap top to boot up to usb flash drive?
Ahhhhhh! you open the DOS propt ? RIGHT ?

Nope, once the USB drive is formatted right, it should boot from it directly.
(Ie, turn on the laptop, and it's there). You may well have to go into the BIOS and check the boot order of your HDD/CDROM/USB. Set USB to be first.

This greatly hinges on your laptop's ability to boot from USB. If it doesn't, another option is to create a DOS-bootable CD and boot from that. Downer here is that unless you have a FAT partition on your main disk drive, you won't have anything to write to, except floppy, which is slow as heck. PCMCIA or USB drives typically won't show up in DOS unless you booted from them.
 
Top