Did Some tuning this weekend.

dgoodhue

BuSTeD 4.3
I still have a long way to go but I am making progress on the part throttle tuning. Initially I wasn't doing enough smoothing which was hindering my results yesterday.

If I can keepeveryhting together, my truck is going to be really fun to drive with the Turbotime 214 Cam/Ported Vortecs/ PTE61 Ball Bearing Turbo.

I had the 12-20 psi wastegate on the PTE turbo set to almost to no tention on the wastegate arm with the flapper closed. I squeezed the throttle last night on the highway to my surprise I hit over 15psi :squint: It was pulling pretty hard but it had missfired and detonation. I wasn't looking at the boost guage just the WBO2. The motor still seems fine; hopefully I didn't damaged anything. The turbo spooled up real fast. Today I backed out the wastegate rod 5 turn so it always open, it doesn't get into boost as fast but it still hit 10psi at part throttle.
 

dgoodhue

BuSTeD 4.3
Re: Did Some tuning this weekend.

I don't have a boost controller. I am running the boost source from the compress straight to the wategate actuator. I was planning on setting the base boost to 12-13 psi and then use the stock solenoid and code59 programming to raise the boost from base boost.
 

bezerk

New member
Re: Did Some tuning this weekend.

that is your problem. you need a boost conroller. if you don't run it, the pressure from the actuator and the exhaust pressure is trying to do 1=1 and you end up getting boost creeping...been there done that
 
Top