dies at idle

WyoSyclone

Active member
Re: dies at idle

could be vacuum leak, if motor is modded or new injectors could be the tune.

5 min on a laptop I could fix it sitting in the truck.

Book me an airline ticket and I will show you in person.

x2 .....it's the tune.... you've changed things but not dialed in the tune. Do you have TunerPro?
 

bezerk

New member
Re: dies at idle

i have tunerpro, i had 4 bins from nolan. but with the time diference we have it sometimes takes a day to get a new bin. i can life with that, but not with this idle.
been ****ing around with everything whole day.
what do i need to change? F31E?
 

WyoSyclone

Active member
Re: dies at idle

If you're running '58, F29C is your closed table VE.... Turn on the data tracing and you can watch the bubbles interacting with the values.... at least I think you can on '58.... I only have experience with Code59.
 

bezerk

New member
Re: dies at idle

If you're running '58, F29C is your closed table VE.... Turn on the data tracing and you can watch the bubbles interacting with the values.... at least I think you can on '58.... I only have experience with Code59.

thanks. so i open up the table, than datalog and put on datatrace?
 

WyoSyclone

Active member
Re: dies at idle

thanks. so i open up the table, than datalog and put on datatrace?

datatrace as you're monitoring the aldl stream... has been a long time since I've had my stuff hooked up.... this MAY only be possible with and Ostrich.... Jeff, you readin this?
 

turbodig

Active member
Re: dies at idle

If you are running $58, and have larger injectors, it's likely an issue with F29C.

Does the wideband data swing rich/lean as it surges/stops?

Is this only when cold, or does it do the same thing warmed up?

I've got sort of a crazy idea, if you have an internet connection that you can get to your laptop hooked up to the truck...
 

bezerk

New member
Re: dies at idle

it's rich and at the time is goes rich it leans out bad. but it prolly dies because of lean mv between 140-900
 

bezerk

New member
Re: dies at idle

If you are running $58, and have larger injectors, it's likely an issue with F29C.

Does the wideband data swing rich/lean as it surges/stops?

Is this only when cold, or does it do the same thing warmed up?

I've got sort of a crazy idea, if you have an internet connection that you can get to your laptop hooked up to the truck...

i love that idea. problem is that at this moment it won't work. i have an internet connection but my GF says no tonight.
it goes rich and lean on the wbo2 as well. 12-18..
should we try to hook up tomorrow?
 

bezerk

New member
Re: dies at idle

i'll get my plx back in since it works almost the same as my stocker btw. readings aren't to much off maybe about 20mv
 
Top