Dipstick part number

Don W.

Don W.

Stab it and steer it
Does anyone have a part # for an aftermarket flexible dipstick replacement? Or the entire tube and dipstick. Regular flat stick only bends one way and I need one that bends both ways.

Tons of sticks out there for transmissions. I didn't see any long enough for our motors.

Thanks
 
Syclone#892

Syclone#892

Member
Re: Dipstick part number

I used a lokar dipstick, it wasn't the easiest but it worked out really good. I remember having to grind the side of the block and the dipstick tube so it would fit there, I also know I shortened the tube going into the block as it would have hit the main cap. The length turned out just right which was really nice, if needed it can be shortened at the handle or you can call lokar and order a length of the stick if it's too short. Good luck with the project :D
 
Don W.

Don W.

Stab it and steer it
Re: Dipstick part number

Great, thanks. That link has expired but the thread and pictures help a lot. I don't know why I couldn't find that with a search before I posted.:tdown:
 
You must log in or register to reply here.
Top