diy-wb building question

Falco

Donating Member
Howdy,

Just plan to start to build the kit. All of the components are here. One question for those who have already built this.

Do you use LM317T or LM1086 for the regulator? The LM317T said to need 13.8V all the time. Is this true? I've no 13.8v at WOT, so if this's the case I'd rather use LM1086...

TIA,
Zsolt
 

JoeLutz

New member
While were at it I have a question also. How are people mounting the interface board. I know it needs a heatsink, but I would like to put it in an enclosure for protection.
 

leroy

Donating Member
I use a Radio Shack project box. They have one that's about 3"x5"x2" that works nicely. The aluminum lid makes a nice heatsink. Use a mica heatsink washer to mount the voltage regulator to the lid.

Jim
 

leroy

Donating Member
On 2002-02-20 04:20, velox03 wrote:
looks good, tell us how it goes.

It's going well for me. It has stood up to quite a bit of abuse....I've dropped it, wired it up backwards, left it in the exhaust for extended periods.

YMMV,
Jim
 

TurboTony

Active member
Wow, great post Falco. :eek:

Nolan and I are gonna start the assembly process pretty soon. Neither one of us have really worked on i/c's before so it could prove intersting.

Lets Keep this post going, it will be a great help to all those working on the diy w/b project.

Hopefully it woun't turn into another bitch session/name calling thread :roll:

Hey Leroy, I sent an icq request a while back. I really wanna pic your brain about the 55's and the w/b, lets chat sometime.


TurboTony

_________________
Sy2356
Te63e, 009's
11.8@118mph
In the tuning stages...
If it aint blown it sucks!

<font size=-1>[ This Message was edited by: TurboTony on 2002-02-20 19:31 ]</font>
 

leroy

Donating Member
On 2002-02-20 19:29, TurboTony wrote:
Hey Leroy, I sent an icq request a while back. I really wanna pic your brain about the 55's and the w/b, lets chat sometime.

ICQ doesn't let me add you Tony. I get an error saying plugin not installed properly. I'm trying to get it fixed.

Jim
 

TurboTony

Active member
Hmmmm, somethings funny with my icq too. Your authorization came through but it didn't add you to my contact list, I sent another request. Maybe that will work.


Talk to ya soon


Tony
 

JoeLutz

New member
Jim,
Thanks for the info, as always very helpful.
_________________
Lenoir, NC
seadooZuk.jpg

Is it summer yet?

<font size=-1>[ This Message was edited by: joelutz on 2002-02-21 00:19 ]</font>
 

Falco

Donating Member
Tony,

I'd not recommend to start to learn soldering with this kit. It's really tight. Now techedge sales built and tested units. It's around $90 if I'm right. (You might recognized that techedge is not so popular amongst the diy-efi.org folks, but well...)

It also would be nice to ask Dig to give us his ECM hacking instructions to let the wb talk to the ECM.

Peace,
 

leroy

Donating Member
On 2002-02-21 04:39, Falco wrote:
It also would be nice to ask Dig to give us his ECM hacking instructions to let the wb talk to the ECM.

I asked Dig about it awhile back, and he was in the middle of moving, and said he would let me know when he found his notes. I have figured it out since then, with a little help (thanks to BG and diy-efi). I would still want Dig's permission to share with others.

I have also tested Brian's code change. It works also, but only in PE mode.

Jim
 

smeagol

Active member
Dig replied to Al that his code was public domain and ok to give out.

I would like to put it in the 50# chips, and people could either use it or forget about it, but that is a grey area, and not really the same as letting someone have a copy of the code. I am selling the chips & making money off of them (not getting rich mind you :wink: ), but I don't want to ruffle any feathers by having this as a 'feature' of my chips, as a possible selling point.

The way I look at it, people are buying the chips anyways, whether or not this feature is in it, but I do feel a bit weird putting something that was generated by DIY/public domain group in my private business calibration. Kinda like people selling the wb 02 setups. Yes they are still keeping it cheap & not very profitable, but it is still taking others' ideas & work.

So Dig, if ya read this anytime soon.. Yea or nay? Just say the word, and I understand if you don't want it in there.
 

JoeLutz

New member
to datalog with the wb02, how are you coupling the output of the 02 interface board to the ecm or does it go straight to the laptop?
TIA
 

leroy

Donating Member
Use ecm pin F14. It is the unused fuel pump input. I removed the pin from the egr, and used it, since I have that disabled.

Jim
 

smeagol

Active member
Could some of you share with me this information then?

I was planning a webpage about it, to go along with my chipping/code pages.
 
Top