dizy

[sean]

does anyone know what disy (cam sensor) that can work? i have rpm crank trigger kit just would like to know what i use to run the cam as a second signal .

 

[sy605]

Re: dizy

On the top of the distributor there is the press on steel gear that the pickup reads. There are a few triangle shaped ridges that trigger the pickup when it spins. Grind off all of them but one. Now you have a cam sync.

 

[nallj92]

Re: dizy

^ just did that but, there is a magnet rivited between the two metal pieces, so its not gonna work with a hall effect/VR set up due to the magnet

Best bet is use a vortec dissy with the VR pickup, it had a window and 3 wire sensor already. What EFI set up is this going to be used for?

 

[sean]

Re: dizy

^ just did that but, there is a magnet rivited between the two metal pieces, so its not gonna work with a hall effect/VR set up due to the magnet

Best bet is use a vortec dissy with the VR pickup, it had a window and 3 wire sensor already. What EFI set up is this going to be used for?

prob bs3 but uncertain yet. i want to do coil on plug for my bow tie build