Beavis said:
now I have it installed and working, just gotta figure out what it all means. Any hints or suggestions welcome... thanks
find a good stretch of road that you can do your test runs on
safely
i usually try to keep the recordings rather short and to the point.... ie. I will find a place where I can safely bring the truck up to around 80-90mph, and then back down to a stop.
So start up the recording on datamaster then get to your "straight away" and floor it. Go WOT until you hit 4th gear and about 80mph or so.
Then go back and look at your run on datamaster. It will give you an idea of how steady your boost is, if you have any knock, etc ,etc.
Double click on the items in the lower right hand corner to change what is graphed out in the display. Compare things like your 02's, boost, knock, RPM, etc to see how they all relate to each other.