Does disabling EGR burn valves quicker??

Hey Guys,
I was tellin an old timer mechanic about how the majority of SYTYers block the EGR valve for cooler MATS. He said that I shouldnt have done that because the exhaust valve will overheat and burn up alot quick as a result. Anyone know?? FernSy#477
 

Lynn D. Brown

New member
EGR block

EGR block

Fern,

This makes no sense to me. Cars had no EGR for many decades before EGR's came in. So why all of a sudden would exhaust valves have a problem w/o a functioning EGR ?

The principle of EGR - Exhaust Gas Recirculation - has been around the pollution reduction game long before cars adopted it. One of the main pollutants in any combustion device - like our cars - is NOx, which results from the reaction of Nitrogen and Oxygen in the air to the engine. It's that brown stuff U see in the air in big cities.

Well the higher the temperature in the combustion chamber, the more NOx is formed. So, EGR lowers that Temp by recycling back exhaust gas to the intake to lower the Temp in the combustion chamber by diluting the whole mixture.
 

SY756

New member
I agree with Lynn. I dont think that removing it will cause premature valve trouble.

EGR's are both good and bad.
Good, reduces combustion chamber temps and well, emissions (put that in there for any tree huggers out there :D )
BAD, greatly increases MAT and heat soaks the plentum and manifold.

So if you're just crusing around I guess they are ok but when you go WOT your screwed from all the heat the EGR has built up. I know that the EGR shuts off at WOT but all the heat is already there. Me personally would rather have a cooler intake ready to go full throttle.
 

Lynn D. Brown

New member
EGR systems

EGR systems

Right Larry,

EGR systems were installed strictly to lower the production on NOx. They would not have been installed otherwise. In general, the higher the combustion temperature the higher the power AND efficiency. However uneven temperatures - hot spots - can cause detonation, and the parts in the combustion chamber - pistons, valves, cylinder walls - have their temperature limits.

That's why one of the areas of research in combustion engines is the use materials that can take survive at higher temperatures, like ceramics.
 
Top