Drac setting for 200 mph speedo

[BULLY Syclone]

Does anyone know the drac dip switch setting for a 200 mph speedo?

Thanks

 

[MikeRenz]

Re: Drac setting for 200 mph speedo

Hi John,
I was still getting around to pm'ing you back. By my calculations....drac settings are:.

input ratio: 1.401167

Pins:
7 6 5 4 3 2 1
-------------------
1 1 0 0 0 0 0
jumpers


*note: in http://www.syty.net/forums/showthread.php?t=40016 I told Aaron to use 1000000, and I am pretty sure that was because my .pdf is cutoff for the f#7 pin and I didn't count my digits. oops.

 

[BULLY Syclone]

Re: Drac setting for 200 mph speedo

Hi John,
I was still getting around to pm'ing you back. By my calculations....drac settings are:.

input ratio: 1.401167

Pins:
7 6 5 4 3 2 1
-------------------
1 1 0 0 0 0 0
jumpers


*note: in http://www.syty.net/forums/showthread.php?t=40016 I told Aaron to use 1000000, and I am pretty sure that was because my .pdf is cutoff for the f#7 pin and I didn't count my digits. oops.

So since I have dip switchs I just turn on num. 6 and 7 ?

Thanks Mike

 

[MikeRenz]

Re: Drac setting for 200 mph speedo

So since I have dip switchs I just turn on num. 6 and 7 ?

Thanks Mike

yup, that should do it. Please post back and let us know if it works. Please test it all the way to 200mph

 

[BULLY Syclone]

Re: Drac setting for 200 mph speedo

yup, that should do it. Please post back and let us know if it works. Please test it all the way to 200mph

Can do! I am thinking about doing the Texas mile next year. I may need your help next week to post videos of the colorado street outlaw race this weekend.

Thanks again

 

[MikeRenz]

Re: Drac setting for 200 mph speedo

sure thing just let me know! good luck at it!

 

[BULLY Syclone]

Re: Drac setting for 200 mph speedo

Thanks Mike,

Speedo works perfect!