Dunstan's stuff blows...

dgoodhue

BuSTeD 4.3
I went to realign 'the toe in' on my coilover suspension today Here is how it started off.

Coilover.jpg


I started adjust the driver side and all of a sudden it was hard to adjust in about two turns. I knew this wasn't good. I started to back off, then snap.

broken_tierod.jpg


Is this supose to be connected? :fist:

broken_tierod_close.jpg


Anyone who has work with Al Dunstan stuff will notice his threads weren't the best in the world. I think the thread got muck up inside and then I snapped the heim joint. What concerns me is how easily Al's 'aircraft quailty' heim joints snapped. I didn't expect the heim to break I was more expected ot stripped the threads.

So much for puytting my Sy on the road Monday. I just have to adjust the toe and bleed the brakes once I get the missing adapter from Tucker Autoparts.
 

TT350

Manufacturer
Re: Dunstan's stuff blows...

Put your stock tie rod ends back on.
Heims have on business on the
street in a tie rod application
or control arm bushing.
 

SY2932

Administrator
Re: Dunstan's stuff blows...

Better to discover the problem now while it's in the garage rather than going down the highway or the track... That is the other reason why folks started to shy away from his stuff in addition to the outrageous delivery times. Other other folks who were breaking parts *regularly* were high HP for the most part. Regardless, it sucks to know that you didn't get what you paid good money for :(.
 

dgoodhue

BuSTeD 4.3
Re: Dunstan's stuff blows...

Yeah I rather have it now in the gerage rather when driving. BTW the title might be a little misleading the tie rods only are dunstan parts, the rest of the suspension is JS.
 

SY2932

Administrator
Re: Dunstan's stuff blows...

Heh, I *thought* that the arms looked A LOT beefier than they should ;)... In that case, be glad that you don't have Dustan parts all around.
 

ghettosled

SYTY SUPERSTORE
Re: Dunstan's stuff blows...

did you put antiseeze on it when you assembled the heim? Always a good idea to re-tap if something doesnt seem right when assembling. Either way, that sucks but atleast nothing major resulted from it.
 

Merk

Donating Member
Re: Dunstan's stuff blows...

poop is poop, no matter how you slice it. Anyone that is still using Dustan parts should seek a 2nd opinion.
 

dgoodhue

BuSTeD 4.3
Re: Dunstan's stuff blows...

I don't own a tap kit to chase threads, especially the reverse threads on the tie rod ends. I didn't use a ton but did put a dab of antiseeze on them.

The thread were a little difficult (especially about 2/3 of the way in) when I first put the heim joints in, but I had worked on them screw them in and out. The thread still look fine on the heim just before installation as I check them over and the seemed to be threading in and out as if their never was a problem. Infact I was thinking to myself how easy they were to turn (I could turn them by hand with the wheels off the ground.) and never expected that to be a problem.
 
Top