Dyno#'s The weakest sy ever

SloGN

9Sec Alky V6
Guys

I think i own the weakest sy/ty ever produced:rant:


I dynoed the sy tonite using a mustang dyno. The mods to the truck are flowmaster muffler 2.5 pipes with a highflow cat a walbro fuel pump and a adj regulator. I don't have any datalogging stuff for the sy either. i didn't hear any knock at all.

but it made a whopping 203hp with 313 TQ pulls were made from 50mph to 90mph to stay in third gear without downshifting.


I was having trouble with the boost surging from 10-15 psi. I corrected that but doing a bypass on the stock stuff and got a rock solid 15psi of boost.

I'm still on the stock chip as well.

so is this inline with some others or do i really have the slowest/weakest sy ever.
 

nello

Active member
Re: Dyno#'s The weakest sy ever

Nope...I'd sell that one!

J/k man! First, let me suggest getting SLO out of your name. :) 2nd, no way with those mods. Maybe you have an issue with the dynoing setup? Go get a fresh kill to make you either a) feel good again or b) know for sure if you've got work to do...

edit. just noticed those mods are for your GN :lol: ....f it, drive that!
 
Last edited:

It's just a six

Super Member
Re: Dyno#'s The weakest sy ever

Most times you cannot hear detonation.
What grade fuel?

Need a scan tool,needs a different chip ,tunning ,tunning, & more tunning. Plus more parts,adjustable FPR,& Walbro 255 HP pump + more,get rid of flowmaster muffler,& more............................................................

From What I remember, most completely stock Sy/TY's make around 280- 300 or so HP @ the rear wheels on a 2WD dyno.
 

TYTILIDIE

METH HEAD
Re: Dyno#'s The weakest sy ever

What do you run in the 1/4? Thats all I ever care about. That and who I can beat on the street, who the hell needs a dyno?
 

JSM

Active member
Re: Dyno#'s The weakest sy ever

I have heard the flowmaster mufflers don't do well with turbo's. Not sure that is THE problem just a common thing in the turbo world.

Need a scan tool without a doubt, even with a stock truck. Chances are if you hear detonation it will be followed by oil leaks or smoke before you can say I think I heard something.
 

Six-is-Enough

Use to do a little Boost
Re: Dyno#'s The weakest sy ever

Also mustang dyno's read LOW. Most chassis dyno's are DynoJet and they tend to the high side. I would also like to know about what rpm range the pull was made through. Sy are grunt monsters mine made peak HP @3600 Peak TQ @3200.
 

warmpancakes

New member
Re: Dyno#'s The weakest sy ever

I have heard the flowmaster mufflers don't do well with turbo's. Not sure that is THE problem just a common thing in the turbo world.

Need a scan tool without a doubt, even with a stock truck. Chances are if you hear detonation it will be followed by oil leaks or smoke before you can say I think I heard something.



Flowmaster will tell you not to use their mufflers on a turbo application there WAS on on the typhoon, after removal truck runs way better and is quieter?
 

UR50SLO

V6+2=LSXCamaro
Re: Dyno#'s The weakest sy ever

What do you run in the 1/4? Thats all I ever care about. That and who I can beat on the street, who the hell needs a dyno?
:thumbsup:

I'm with him... I've never been to a dyno and don't care what "Number" it would spit out anyway...
If you've got a car that makes 1000hp but can't put it to the ground what good is it?

Honestly I look at MPH in the 1/4mi more than anything else. ET's will vary with ability to launch/tires/track conditions and converter match up.. but you'll still MPH with in a few MPH even if you blow the tires off all through first gear. MPH won't change much.

Keep you head up .. go throw that sheet away and don't think about it again.:tup:

~Scott
 

jwaller

Evil Genius/SyTy Guru
Re: Dyno#'s The weakest sy ever

flowmaster's suck on turbo cars. your #'s are indeed very low. I remember some of mine were nearly 300hp and 400tq stock.
 

Brassmonkey

Cruzin' Mel Man
Re: Dyno#'s The weakest sy ever

Pat, have you checked for backpressure before the cat and between the cat and muffler? I take it you got your vibration problem fixed?
 

White97SVT

Member
Re: Dyno#'s The weakest sy ever

Mustang dyno's typically read lower then other dyno's. I am not sure buy how much you would have to reseach that.

I have seen STi's making 340whp on Dynojets and suprflows get on the Mustang Dyno and only make 300 and 290 even. Without some datalogging it's really tough to tell what's going on with the truck. If it runs strong pulls hard and feels good to you then there is probably no issue at all.

My Typhoon bone stock made 258 or 260 can't remember and 400tq
 

DanenGraham

Big in the rear
Re: Dyno#'s The weakest sy ever

Norms old one, bone stock i sure #1536 looks like.

DynoSyWeb.jpg
 
Re: Dyno#'s The weakest sy ever

That sounds really low! Was it an AWD dyno? You also have to remember that is to the wheels.
Looks like your talon is a lot faster. How does the sy compare in speed?
 

gkrcr882

SyTyless......for now!
Re: Dyno#'s The weakest sy ever

Throw a Magnaflow on there and make sure the IC system is working properly. Do you have the pump hotwired?
 

syclone3

Member
Re: Dyno#'s The weakest sy ever

I have an all stock Syclone to dyno on my Mustang dyno. Maybe in the next month or so. Will hotwire the CAC and thats it. One of my others was stock with a plugged up stock exhaust and converter and made about 220 and 350 tq. First few runs were in the 190 range. Just blowing carbon out the exhaust and gallons of water from the stock mufflers. For comparison a 2006 EVO IX makes 286 at the crank and puts down on average in the 225-230 range on my dyno. And thats a manual trans car!!! But the drivetrain sucks up a lot of power. AT cars show a larger loss. Can still be fast with a low HP reading. Especially when it has a high stall converter.
Lot of people hate dynos. Great for testing parts and setups, tuning. Especially with the eddy current loading on the Mustang dyno. Little hard to do on a dynojet. Can simulate real road or track driving and do tuning fairly quickly. Sure saves time at the track having a setup already dialed in.
 

SloGN

9Sec Alky V6
Re: Dyno#'s The weakest sy ever

ok guys


I have the exhaust off the truck now. It goes wed to get a 3 inch exhaust with a dynomax muffler thats straight thru.


Now with the open downpipe it really feels good. i had the snap-on scanner on it and it show 3-4 degrees of knock on tip-in before it ever really starts to make much boost. i'm guessing that the exhaust is raspie enough to cause this?


but i will let ya know how it does after the exhaust is put-on.



Brain

if ya can see if phil can do a chip for the stock inj and a chip for 60's for matt's ty. thanks dude.
 

jpalmer

New member
Re: Dyno#'s The weakest sy ever

if this is a stock turbo, be VERY careful! even with just a cat delete and 3" exhaust can overboost. It happened tome and many other people. dp only will def cause this too. The waste gate does not flow enough to release the gasses. Please dont blow it up,it is way to easy. you need a ported wastegate or external wg with the stock one wired open to get away with it.

Several vendors can port you turbo for you so this wont happen. please be careful
 
Top