Dynometer Run

Quickstop [UK]

Combating adversyty.
I have decided to take the truck to an AWD dyno facility to get a really good look at what is going on with my truck's performance.

I feel that is is well below par. The performance at the moment is confined to a very narrow band and it is not acceptable. That is as far as I know.

Where should I see the supposed 300 horsepower? IE what RPM?

Are there any figures out there for coparison to identify a problem?

Has anyone done a dyno run before? Any recommendations?

I will post the results here and if someone were able to look at them and comment I would be mucho grateful as ever!

At £60 +TAX ($160) per hour it better be worth it!!

Cheers,

Mark
 

bezerk

New member
Re: Dynometer Run

to be honest, i first would do all the work, and not bring your truck in there with all the work 1/2 done.
a friend of mine brought his Syclone (stock truck) to a dyno shop, and they blew a piston within 10 min.
you are having a 20G turbo on a stock converter, i drove your truck shortly after we put the 20G on, and above 4k rpm it performed pretty well..
i really think you should install your other TC first, and do some datalog runs, instead of briningen your truck there with a combo that is proved for not working.
 

Quickstop [UK]

Combating adversyty.
Re: Dynometer Run

I am going for a static tune first. Ie engine running, oscilloscope on timing, checking it is all running well - I think it is not. I belche smoke (black when I floor it) so I really want to know what is going on in the engine.

Pimp - Thanks for the link - I noticed he had some engine work done with the heads and valves so I guess mine will be a bit less.

They are going to look at the timing and fuel etc etc just to make sure it is running ok. The dyno run I can do later, but for curiosity it would be interesting to see the performance difference between the truck as is, and when the TC goes into it. More useful info for people on here I guess.

I just spent $$$$$$$$$ on all the tools to get the trans off and the new TC in soon, but I have no time at the minute. We will see.

Rene I hear you but if they find a problem now then it might save me some money!
 
Top