E85 code59 erue bin question....

sharkbait

New member
i downloaded erues code59 bin for e85...it seems to be a pretty close build. thank god cause there isn't any other e85 bins (that i saw). anyway, in the f29_afr table the afr's are all for gasoline 14.7 etc. i know i have to change my plx to the e85 setting but doesn't the f29_afr table have to be changed too? i only ask cause 14.7 isn't e85 correct.

i know ill get a quicker response here. thanks in advance guys.

p.s. i don't have e85 in the tank yet.
 

sharkbait

New member
Re: E85 code59 erue bin question....

someone PMed me some good info that basically answered my question. i didn't wanna keep it to myself. its best to share good info....

I did some research on the PLX's website:
GASOLINE is: ( AFR= Voltage * 2 + 10 ) and outputs a 0-5v swing. <-link
E85 is: ( AFR= Voltage * 1.328 + 6.639 ) and outputs a 0-5v swing. <-link

...So the output to your ECM from the PLX would be the same 0-5v swing. The PLX is doing the conversion for you where 0v is rich and 5v is lean and 2.5v is Stoich for each fuel when you select the type. You wouldn't have to change the table F29_AFR because the PLX is doing the change. So you will see the correct AFR for E85 on your PLX gauge 9.76 but the ECM only can see the 0-5v swing and you will see 14.7 as far as Tunerpro will show.
 
Top