Easy Tunerpro Rt question

MRKING

New Parts for Old Trucks
I know its an easy question for someone . Whenever I have tunerpro monitoring and the aldl cable wiggles just right , to stop connection for a second , the program locks up and sometimes i have to restart my laptop . Its a new gateway notebook , so I know it has enough system resources . Datamaster works without hiccups , so I know the cable is fine , and I am hoping it is a software problem . I re-installed RT v4.13 and the NWSTP .xdf .ads files and will try again later . But I wanted to know if anyone else has the same thing happen . Say you unplug your aldl cabale and plug it back in while monitoring/emulating , does it pick back up right where it left off ?
 

nallj92

Active member
Re: Easy Tunerpro Rt question

mine ocassionally freezes also, gotta force quit and restart tuner pro, usually happens when im loading a bin or something. hasnt happened lately tho, peeving, but im in no hurry so doesnt bother me much when it does.
 

SBNova

New member
Re: Easy Tunerpro Rt question

I thought I read somewhere to always shut down or disconnect before you actually disconnect on TP or it could lock up, just like your saying. What part of your cable comes loose? Mine has all fit pretty snug so far, but my Ty isnt that fast either.
 

MRKING

New Parts for Old Trucks
Re: Easy Tunerpro Rt question

I am trying 2 diff ways . #1 is the moates aldl cable with the moates aldl to usb adapter , and #2 is a PCMCIA to RS-232 Serial 9-pin CardBus Adapter . Datamaster works flawlessly but , tunerpro rt doesnt like my truck for some reason .
 

MRKING

New Parts for Old Trucks
Re: Easy Tunerpro Rt question

I solved the problem, The datamaster cable I got from dan only uses 2 of the aldl wires and is a permanent install . I guess tunerpro rt *must* use all the aldl wires , and even though it reads connected from the 2 wires, the missing streaming data causes issues . Thats also why the moates cable didnt work on my truck since the other cable was hardwired . I cut dans datamaster cable loose and all is gravy now . I am in no way knocking dans cable , its just not setup for tunerpro in case anyone else was having compatability problems .
 
Top