ECM-1 fuse

leroy

Donating Member
I blew the ecm-1 fuse today on a test drive. I replaced the blown 10 amp with a 15 amp, and so far, so good. I have a feeling it has something to do with the peak & hold injectors. The ecm and wiring didn't seem to be hot. The injector drivers have been upgraded. Anyone else have any experience with these? Ideas?

Otherwise, the 55# tuning is coming along. Idle, and cold idle are good even with pulsewidths around 5-6msec. Driveability seems fine, but haven't been above 10 psi yet. (The fuse blew today around 9 psi). Wideband readings don't seem too far out of whack except really rich on decel. There is still lots to do, but I am surprised how well it drives with a little work.

Jim
 

TurboTony

Active member
I know that this thread is pretty old, but I thought I would add to it in case someone else ran into it in the future.

I had the same thing happen, blew the 10 amp fuse as soon as the injector dc came up the first time. Scared the hell outta Nolan and me.

I changed it to a 15 amp, no problems since. I would have to agree with Jim, that the peak and holds must have a higher draw when the p/w comes up

Tony
 
Top