ECM to read Wideband

LIL QIK

HELL YEA I GOT BOOST!
I've been reading up on some of the widebands......and a lot of them are offering a wire that references to the ECM. My question is....is there anything that needs to be done or converted in our ecm for the factory computer to make use of this signal.

For some reason I'm thinking that I read that there is.....but can't seem to find it anymore.

So any help would be greatly appreciated........
 

Luke

Fish sticks SUCK !!!
Re: ECM to read Wideband

there is some stuff here about getting the patch from dig and to get the ecm to read analog with a capable w/b
 

cvcsmkr

Donating Member
Re: ECM to read Wideband

keep searching all the details are here

the BIN file on your chip, needs to be patched for the WB you are using.
turbodig mad this patch and has the info on his site.
so you will either need to send the chip to someone with the capability of modifying yours or get the ostrich setup that i and a lot of others are using.
 

SBNova

New member
Re: ECM to read Wideband

I think what you are talking about is the simulated narrow band output. This wire replaces the wire you stock O2 sensor uses to feed the ECM, and it is only used when you replace your stock 02 sensor with the wideband (like using the existing bung for the wideband and not having the narrow band any more).

You dont NEED to retain the stock 02 sensor with this arrangement.

What the others are talking about is feeding the raw wide band output into the factory ecm. Your ecm will not process this info, but it will output this into the data stream when your datalogging so you can log everything together.
 

Luke

Fish sticks SUCK !!!
Re: ECM to read Wideband

SBNova said:
I think what you are talking about is the simulated narrow band output. This wire replaces the wire you stock O2 sensor uses to feed the ECM, and it is only used when you replace your stock 02 sensor with the wideband (like using the existing bung for the wideband and not having the narrow band any more).

You dont NEED to retain the stock 02 sensor with this arrangement.

What the others are talking about is feeding the raw wide band output into the factory ecm. Your ecm will not process this info, but it will output this into the data stream when your datalogging so you can log everything together.


I knew what i said was wrong after reading it a few times. :roll:
 
Top