I have the block off plate on order to my house now. But i have a lil problem. All my vaccum lines are hooked up corectly.I deleted my vac ball and plugged the line with a screw and also left my egr vac line unhooked intell i get it i thought you were supposed to block off the egr line too? but with both the vac ball line and egr line closed off my trucks check engine light flashs on while im idle for like 1 sec and it cuts out and then it repeets this intell i move forward and when i move forward at a constant speed like 40mph you can feel a short cut out like every 15-20 sec. hope this big paragraph helps someone to tell me whats wrong. could the problem be that i dont have the block off plate on yet????
egr block off???
- Thread starter NeedaSY
- Start date
Loeryder
New member
Re: egr block off???
What setting are you running on your Ultimate?
T1-15psi should be the only 1 with EGR enabled.
All other programs should not throw a code.
I have run an EGR blockoff for years and never gotten a CE light, but have heard of it happening on stock chipped trucks.
What setting are you running on your Ultimate?
T1-15psi should be the only 1 with EGR enabled.
All other programs should not throw a code.
I have run an EGR blockoff for years and never gotten a CE light, but have heard of it happening on stock chipped trucks.