EGT INSTALLATION

AXXE

Member
I REALLY DONT WANT TO TAKE OFF THE TURBO TO DO THIS. I HEARD OF STARTING THE ENGINE BEFORE GOING ALL THE WAY THROUGH BUT THIS SOUNDS KINDA HOT. ANY SUCCESS STORIES PLACING IT AFTER THE TURBO? HOW NECESSARY IS IT?

<font size=-1>[ This Message was edited by: AXXE on 2002-01-21 22:54 ]</font>
 

jwaller

Evil Genius/SyTy Guru
I put mine right next to the O2 sensor..have seen several of them there...works fine....EGT is a little too slow to be real useful but ...hey whatever floats your boat..I pulled mine out after about a month...
 
B

Blake

Guest
What are guys using to do wideband that still have the stock ecm? I mean as far as coordinating the data with the rest of the data to make it useful?
 

jwaller

Evil Genius/SyTy Guru
I use a standalone display...you really only need it for WOT.and then it's easy to use
 

0-60N4

Member
I agree with JW on the WB. However, if you can collect some data with both a wide band and the EGT, you can correlate the EGT to the AFR. I have my temp probe just behind the 02 sensor and found that an AFR of about 12:1 gave an EGT of about 1250 degrees F. Wouldn't want to go much over 1300 F and below 1100 F it was too rich.

Jim Longwith
 
B

Blake

Guest
Thanks Jim! At least I have a ball park now. It sounds like the probe will last longer there as well.
Blake
 
Top