EGT probe location

Lynn D. Brown

New member
I have an EGT on my Ty and I installed it on my ATR Pass Header about 1-2" before it goes into the Turbo. When U get on it the temperature soars to ~ 1600 F and will go over that if U stay on it. We are wondering if that is a real temp.

Is that where the EGT probe belongs ? Or should it go after the turbo ? I've got to believe it for the time being, because I don't want to melt the engine.
 

sy#2921

BAMF
Re: EGT probe location

That is the best location for one to be. If you want to be safe you can put it in the DP just after the turbine so just in case it fails it wont eat your turbo. It sounds like you have a tuning issue since your egt's should go that high
 

SyTyJedi

Jedi Council
Re: EGT probe location

That is a real temp. The turbo will absorb about 300*F so when you see people posting remember that most have their EGT sensor in the downpipe. If you had you sensor after the turbo you would probably be seeing 1300*F.

FYI I would see about 1400*F after the turbo at the end of the 1/4.
 
Re: EGT probe location

Well i have my EGT probe right behind the stock O2 sensor in the DP and i see around 11-1200 degrees under normal freeway driving and at the track the other night it never went over 1200 in an 1/8 mile run.
 
Top