Engine ID help

[MIXEDBREED]

Got a engine block here need to verifiy where it came from. It's a gm 4.3 with the following numbers 10105867, c318, 887n1, 3 SG1 thanks for any help you guys can give. Been searching but only tells me its a chevy lol. I get the manf date ect just trying to see where the block came from.

 

[Jimmy]

Re: Engine ID help

Google down?

 

[teamvortec]

Re: Engine ID help

Try searching up here there is a thread about that casting number.

 

[blacktyaffair]

Re: Engine ID help

Google down?

Nope, still working. :tup:
http://www.lmgtfy.com/?q=10105867

 

[SY2455]

Re: Engine ID help

If you follow the link in these postings you will find your answer.

1. http://www.syty.net/forums/showthread.php?t=20725

2. http://www.syty.net/forums/showthread.php?t=93068

 

[MIXEDBREED]

Re: Engine ID help

Google down?

Nope google was working smartass.

Try searching up here there is a thread about that casting number.

I did search but thanks for the help.

Nope, still working. :tup::roll:
http://www.lmgtfy.com/?q=10105867

If you follow the link in these postings you will find your answer.

1. http://www.syty.net/forums/showthread.php?t=20725

2. http://www.syty.net/forums/showthread.php?t=93068

Maybe I didn't ask in the right words- I know what the casting number is and the year and date of the block ect. I am trying to match the block to a specific vehicle it came out of not just the year range ect. I got it, thank you for the threads and real reply.

 

[Jimmy]

Re: Engine ID help

Nope google was working smartass.

I did search but thanks for the help.





Maybe I didn't ask in the right words- I know what the casting number is and the year and date of the block ect. I am trying to match the block to a specific vehicle it came out of not just the year range ect. I got it, thank you for the threads and real reply.

Who cares what it came out of? It's a generic crap 4.3


Fill it up with block fill to the bottom of the water jackets,slap on some Vortec heads,get a cam/tune ect and don't knock it,

Oh and you are welcome.
I'd rather be a smartass than a dumbass.

 

[MIXEDBREED]

Re: Engine ID help

Who cares what it came out of? It's a generic crap 4.3


Fill it up with block fill to the bottom of the water jackets,slap on some Vortec heads,get a cam/tune ect and don't knock it,

Oh and you are welcome.
I'd rather be a smartass than a dumbass.

Again you post useless shit that no one asked you, perhaps you took my smartass comment wrong so let me try it another way-----**** off.:tup:

 

[wildphil]

Re: Engine ID help

If it is from a Sy or Ty. On the driver side. Right behind the end of the head. On the block to head mating surface(I think). The truck serial number is stamped on the block.

 

[midnightbluS10]

Re: Engine ID help

Maybe I didn't ask in the right words- I know what the casting number is and the year and date of the block ect. I am trying to match the block to a specific vehicle it came out of not just the year range ect. I got it, thank you for the threads and real reply.

Why is that so important, may I ask? There's no difference in engines based on what vehicle they went in originally, Except for SyTy's, I believe.

 

[MIXEDBREED]

Re: Engine ID help

If it is from a Sy or Ty. On the driver side. Right behind the end of the head. On the block to head mating surface(I think). The truck serial number is stamped on the block.

Thanks phil we got the serial number already and fig it all out.

Why is that so important, may I ask? There's no difference in engines based on what vehicle they went in originally, Except for SyTy's, I believe.

No real important reason, was just curious where the block came from thats all. But like most cases here on forums some guys post good info/? and then others just want to be dumbshits about it. If they dont want to help fine but then they should shut the F#%K up..