engine knock with ultimate

dgoodhue

BuSTeD 4.3
Re: engine knock with ultimate

0.032 spark plug gap is fine assuming you have the correct heat range range spark plug. usually a tighter gap is needed for alky.

Yes a fuel pump is at this point in time as is a fuel pressure regulator.
 

SY2455

70's Veteran
Re: engine knock with ultimate

I set the gap @ .026 on the IX 6 NGK with a MSD-6A. How did it work out for you ?
 

It's just a six

Super Member
Re: engine knock with ultimate

so befor I get the new reg and the pump would I be safe lets say running 17 or 18 psi?? or should i just leave the ultimate at the lowest setting?

As I stated ealier,hard pressed to supply enough fuel going above 14 PSI, so meaning, no, do not go above 14 psi.
Leave the ultimate chip in valet mode., Since you are still contemplating going above 14psi.:2cents:
 

IpHoOnDyou

New member
Re: engine knock with ultimate

As I stated ealier,hard pressed to supply enough fuel going above 14 PSI, so meaning, no, do not go above 14 psi.
Leave the ultimate chip in valet mode., Since you are still contemplating going above 14psi.:2cents:

Ok got the walbro in the tank, and the RPM fuel reg and now it runs smoother and just 1 degree ok knock!!! thanks for all the help guys
Steve
 

It's just a six

Super Member
Re: engine knock with ultimate

Ok got the walbro in the tank, and the RPM fuel reg and now it runs smoother and just 1 degree ok knock!!! thanks for all the help guys
Steve

What did you set the FP @ 50 PSI? You can go higher & ty that out also ,say 55 PSI.:tup:

Glad it helped.
 
Top