engine questions..

M

MySaudi

New member
Just puting on my new turbo, and my dad comes home and started to ask me if i put the Gasket for the exuast housing to the turbo on.. I said there never was one on the stock turbo when I took it off.. so I didn't think there was one...

also I'm looking for the egr block plate number..

or a cheap one from here..
 
MRKING

MRKING

New Parts for Old Trucks
Re: engine questions..

No gasket although some use the copper stuff I believe . Shoot me a pm I have a egr block plate for ya .
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: engine questions..

PTE downpipe and external wastegate????? not gonna work.

Maybe a RPM or ATR downpipe is what you are looking for. Both these accept an external wastegate.
 
M

MySaudi

New member
Re: engine questions..

ghettosled said:
PTE downpipe and external wastegate????? not gonna work.

Maybe a RPM or ATR downpipe is what you are looking for. Both these accept an external wastegate.
Click to expand...

http://www.sytyperformance.com/inde...n=com_virtuemart&Itemid=26&vmcchk=1&Itemid=26

this is the one that they said would work with the pte52 that you just shipped to me.. there is no internal wastegate on it.. so i have to get a external, am i right? and this dp has a external spot.. this must be the RPM dp then..
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: engine questions..

the PTE downpipe has the internal wastegate integrated with a flapper (however you will have to find a used one, since they are discontinued)

The RPM downpipe uses a 38mm external wastegate and is separate from the downpipe. We have them ready to ship daily.

hope that helps.
 
M

MySaudi

New member
Re: engine questions..

yep it does.. I was hoping to get a PTE dp used.. but where am I gonna put a actuator for that onto the turbo.. there is no bolts for it..or spots to hook it up.. or do i just loosen some of the bolts in back and get longer ones and hook up an actuator.
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: engine questions..

the actuator bolts to the existing bolt holes on the compressor housing.. same hardware too.
 
M

MySaudi

New member
Re: engine questions..

ghettosled said:
the PTE downpipe has the internal wastegate integrated with a flapper (however you will have to find a used one, since they are discontinued)

The RPM downpipe uses a 38mm external wastegate and is separate from the downpipe. We have them ready to ship daily.

hope that helps.
Click to expand...

is the wastegate you guys sell a 1bar or a .6bar?

I would have to Dump then am I right?.. does that drowned out the sound of the turbo whistle?
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: engine questions..

the wastegates come with springs to set base boost from 5psi to 14psi. The exhaust from the WG gets dumped back into the downpipe so it is quite and actually magnifies the turbo whine or whistle if anything.. sounds really good (not like a open wg on the crossover)
 
M

MySaudi

New member
Re: engine questions..

ghettosled said:
the wastegates come with springs to set base boost from 5psi to 14psi. The exhaust from the WG gets dumped back into the downpipe so it is quite and actually magnifies the turbo whine or whistle if anything.. sounds really good (not like a open wg on the crossover)
Click to expand...

cool sounds good.. :) my brother had to dump out of the dp on his old eclipse and it would sound so loud and drowned out the sound of the turbo and pretty much anyone elses around him haha...
 
You must log in or register to reply here.
Top