epix
Typhoon
To begin with, I rebuilt my engine last summer/fall and only got about 10 miles on the engine before it went into storage back in early november. I got it out of storage today and noticed while driving it would sputter under acceleration of any sort.
The engine and other parts consist of: forged pistons/rods, l35 heads, 412 cam, 50lb injectors, walbro 255, pte63e turbo, a2a, 3000 stall, ultimate chip (programmed for 50lb, 412 cam, and Vortec heads).
Also under medium acceleration, there is more sputtering and I can see exhaust smoke out the tail pipe that is dark grey in color.
I'll hook up datamaster tomorrow and see if there is any knock. Anything else I should look for?
The engine and other parts consist of: forged pistons/rods, l35 heads, 412 cam, 50lb injectors, walbro 255, pte63e turbo, a2a, 3000 stall, ultimate chip (programmed for 50lb, 412 cam, and Vortec heads).
Also under medium acceleration, there is more sputtering and I can see exhaust smoke out the tail pipe that is dark grey in color.
I'll hook up datamaster tomorrow and see if there is any knock. Anything else I should look for?
Last edited: