epping friday night! (9/19)

[Doug]

if anyone is in the area and wants to meet up, i'm planning on running my ty this friday. Finally got everything running right i think, new fuel pump and afpr in today!

 

[nastety92]

Re: epping friday night! (9/19)

How did you make out Doug?

 

[Doug]

Re: epping friday night! (9/19)

even after adding fuel pump and afpr i was hitting ~140dc on my injectors, ran low 13's :-/
Time to upgrade them as well as get my turbotweak chip remapped, just debating doing injectors/chip now or wait til next spring and do injectors, heads, cam, and chip at once

 

[nastety92]

Re: epping friday night! (9/19)

It can't be running to bad if it's running low 13's. I would recommend getting your setup 100% before adding any more mods to it. What do you have done now?

Nick

 

[Doug]

Re: epping friday night! (9/19)

thats the problem, it's running too well for stock injectors, need larger ones and want to plan most efficiently

 

[JSM]

Re: epping friday night! (9/19)

We ran a high 11 in a sy on stock injectors. I doubt a low 13 should be 100% DC.

 

[Doug]

Re: epping friday night! (9/19)

feel free to take a look at them :-/ https://drive.google.com/file/d/0By0wih6ZT4QIYmcwS1FtWW1nZHM/edit?usp=sharing

 

[JSM]

Re: epping friday night! (9/19)

Have not had datamaster installed for almost 10 years now. Unless your 60ft times are 2.5 seconds a low 13 shouldn't be maxing stock injectors yet.

Now if you plan to go low 12's eventually an injector upgrade isn't a bad option, just not needed for a low 13 high 12.