External gate reduces knock retard?

Ian Turgeon

Cascading Inspiration
Ok, since I am really perplexed by this idea... yet seen it in three seperate cases now, I want to see what the brainiacs think.

I posted this tacked to the its mini gate install in mod/repair forum, but didnt get any responces about it...

3 seperate sys, all stock turbo. All generally getting reletively mid/high knock retard (no noticable indications other then diacom). Installed an external gate on the xover pipe, and knock instantly goes to managable levels. Before ranging anywhere from 7 to 12 degrees, to acceptable amounts under 5.

So whats the deal? consistant boost the cure? integral flapper noise? Why would this happen in three different instances?
 

smeagol

Active member
I'll say due to 2 different reasons

1- reduced backpressure => reduced heat

the small turbo creates high backpressure..dumping much of it with an external may help the situation

2- solid boost control across the board
 

Buster

New member
I have no clue how much exhaust is being bypassed through the external gate, but it all makes sense, even adding a 14 cm2 housing will reduce knock.

I wonder if most of the (stock) knock problems are from the housing being so small. I know the stock heads aren't great, but Dig and I got away with a lot more boost and timing than the stockers with just the 20g14cm2.
 
Top