Fast Code59 users

Sean Krupa

Moderator
Rob (Wyosyclone) and I are now finished with my Tune with Code59 which I am thankful for all his help.

I'm running about 16psi and 20* Timing spraying 100% Meth. Rob has done all he can with the Tune and runs great. Is there anyone who made Big power with Code59 able to look at my Datamaster Logs and Bin to see what you think of it? Or any tricks that seem to be hidden possibly?

Just a shot in the dark, just want to see if their is anything else I could do to the Tune to make it Optimum for my Setup..

Thanks,
 

It's just a six

Super Member
Re: Fast Code59 users

To see what can be tweaked here & there you would need to put it on a dyno.:2cents:

You probably wont get much more , Rob knows what he is doing. But, a dyno will give that little extra you may not be able to feel
 
Last edited:

ZavzTy547

Senior Member
Re: Fast Code59 users

To see what can be tweaked here & there you would need to put it on a dyno.:2cents:

You probably wont get much more , Rob knows what he is doing. But, a dyno will give that little extra you may no be able to feel

GN guys will tell you that you won't see big power with 100% meth and low boost.

I'd use a dyno and turn up the boost and watch for knock. . . .
 

It's just a six

Super Member
Re: Fast Code59 users

I would say your build is sort of what Dons Syclone is putting out.

I think he is running similar boost?

He is running pretty good & very good MPH for low boost.

The thing is with stock heads & cam, it makes the engine see choked up boost levels.

My engine is completely stock original & running 100% meth & seeing 25 PSI of boost it put out 396 HP.
Not sure if 25 PSI is high boost for running 100% meth, but, my Sy is not putting down a lot of HP, it can't not with the stock heads & camshaft.:2cents:

I have not run it @ a track since I dyno tuned it, but I am pretty sure it is not as fast as Dons Sy is.

I think Dons Sy is putting out more HP than my Sy is putting out. 430-460 HP Range

Meaning, I think Sean's Ty should run really good also.

With the 96 & newer Vortec heads, you do not need to run as much boost to make more power than the stock heads.

It is easy to boost high on a stock engine, the heads & camshaft are very restrictive, to me, it's like an artificial/false boost pressure. If that makes any sense?

Good luck Sean w/the tuning.:tup:
 

qbnkiller

Conflaguration Specialist
Re: Fast Code59 users

Rob is pretty good with $59. If the truck is running well, go out and see how she runs. I am sure Rob will help you tweak things as you get more data.
 

dgoodhue

BuSTeD 4.3
Re: Fast Code59 users

Boost is the measurement of air backed up into the intake. So yes with smaller intake ports and smaller lift duration cam, the boost levels can be pretty high, but it can has less air flow (HP) through the motor than an engine with better flowing heads/cam at lower boost levels.

I would guess 16psi and 20 degrees of timing is still a conservative tune (assuming the A/F Ratio aren't on edge). You could probably add more timing and boost. I think generally you want to add boost before timing. However a good rule of tuning is that you want to give the engine what it wants not what you think it needs.

I don't know what your goals are? Is it to just run 11.9? 11.5? As fast as possible? I would go to the track and see what your truck runs and go from there. If you want to go faster, add some more boost and/or timing. If the 60’s needs work (either spins too much or slow out of the hole), you can work on the tune for that well (or launch technique or rpm or suspension)

Your setup is like mine, in that my heads/cam/turbo can potentially make more HP than my GM short block will handle. Over the years I have seen a lot of stock short block blow up and some have run good numbers. Some people blow them up because they don’t know what they are doing or even looking at a scan tool. (I can take from this that I don’t have a lot of wiggle room for a bad tune) Of the owners that seem like they know what they are doing, my intuition is that I think I can get to about 500hp or ~118mph trap in a Syclone (which would be a lower mph in Typhoon). This might be fool’s gold being that it’s on the edge of blowing up or a hiccup is going to render my motor a heavy paper weight…I really don’t know. This is just my best guess and understand that I could be totally be wrong (so just don’t blame me if you blow your motor trying to get to 500hp).
 

Sean Krupa

Moderator
Re: Fast Code59 users

Thanks Dave, being I ran 12.1 @113 last year stock heads/cam 20psi 20* Timing, I'm hoping for high 11's with Vortecs, Custom Steve Morris cam.

The 60lb injectors I have are essentialy maxxed out right now at 16psi. I have the Meth Knob at about 5.5 so it's spraying a decent amount. The Duty cycle is about 100% or more in the High KPA and RPMs. Rob has done all he can with the Fuel tables.

It feels great right now, and yes I'll see what it'll do very soon hoping early next Month after I put on my Traction bars. I know it feels quicker than last year at this Boost level, but maybe its just me.

The thing is, if I go to the Track and run the same time, I don't really have much more Room to go as far as Boost, maybe Timing, since I'm on the edge with the 60s. I have the Fuel Pressure at 46psi right now to. Or add a bit more FP/ Meth? From what I heard, you make more Power with less Meth being that your replacing the Fuel which makes the "Power" with Meth as a substitute.

Any other opinions??
 

dgoodhue

BuSTeD 4.3
Re: Fast Code59 users

I would not have expected to see 60# injectors max out at 16psi. I will check my duty cycle tonight when i get home. Phil Long didn't max his 50# on his runs. I had asked personally year back about his duty cycle 90%. I know he was running high boost (which I turn mean higher fuel pressure.) and he was using alky.

I wonder if your fuel pump isn't keeping up. Do you have an electric fuel pressure gauge in your interior? At 16 psi it should be about 62psi of fp with a base of 46psi.
 

randy merritt

Donating Member
Re: Fast Code59 users

I was wondering about maxing the injectors out. I have 60#'s and are nowhere close to max duty cycle. I run 22# boost and 22 degrees of advance.
 

Eric Sy GN

Donating Member
Re: Fast Code59 users

I agree that you would have to be going really fast to max out 60's, especially spraying alky.

x2 on checking fuel pressure under boost.

Eric
 

Sean Krupa

Moderator
Re: Fast Code59 users

I have verified that Fuel pressure was rising with Boost last year. I don't have a Gauge inside, I just hooked up my Gauge to the rail and had the Hood off.

Also, if FP wasn't rising with Boost, wouldn't I know from it studdering or anything like that without meth? It was running fine without Meth as well with good AFRs.
 

nallj92

Active member
Re: Fast Code59 users

You should not be maxing out the 60's yet. I would add more boost with the 100% meth as well, 16psi, your not really seeing any benefits out of the meth (more power)
 

WyoSyclone

Active member
Re: Fast Code59 users

I was surprised that the 60's weren't keeping up as well, and I asked Sean to verify rise in FP, which he confirmed, although it sounds like the info may have been a bit old ;)

We'll diagnose with a FP gauge and make sure the pump is running at alternator voltage....and we'll check for a kinked fuel line.

This cam is bigger than a 422 and we're turning ~5200rpm
 

WyoSyclone

Active member
Re: Fast Code59 users

Yes, this tune has been a bit frustrating :)

For those of you running 60lb injectors, the first thing I found out was that in Code59 no one that I could find had ever researched and applied the correct fuel injector offset values.

After some searching I finally found someone who knew what they were doing and had tested them in a lab. With those correct values in place the injectors finally started responding as I would expect (anyone had idle afr issues with 60's?? - if so ask your tuner if they input those correct values).

My preference is to run 50/50 meth/water, but Sean is comfortable with the 100% meth so that is the path we went down.

We tuned without spraying to get a baseline set for correct VE's. We could only get up to around 14psi with not much timing before we had KR issues - we were running out of injectors even at this point which is where I asked Sean to verify rise in FP. I was taught to optimize afrs then add meth to a point which will drop (richen) AFR's by a value of .5 to .6. TThen add some timing till you just get KR then back off a bit. This is all with a target boost value set. AFR's can then be leaned out to pick up some power, if one is comfortable doing that.

Since the injectors seem to be governing our boost level, I just added meth and timing till we hit our max.

Sean's running sub 4-second zero to 60 with the Ty as it sits right now, but that's as far as I feel comfortable taking it till we CONFIRM that we don't have some other fueling issue.

I have gotten logs from some other guys running 60's and a few have been high in the VE values. Since Sean has a cam that is bigger than a 422, with the Vortecs, running 5200rpm, we may be maxing them out, but I'm not satisfied with that conclusion at this point :)
 
Top