Fast Code59 users

BMFB

Not to scale
Re: Fast Code59 users

You have to be running into fueling issues because I went 12.4s on stock 32's with alky injection.

Even if you managed to think you got the right offsets I wouldn't trust the software to accurately calculate total injector duty cycle. Get a real number on fuel pressure while going down the track and see what that's doing, you might be seeinga big fall off. Do what you can to have it tuned on a track instead of the dyno.

The knock sensors on these trucks arnt great either. I'd be more interested in what you are seeing for afrs.
 

Quickstop [UK]

Combating adversyty.
Re: Fast Code59 users

I have a 415, ported vortecs and SIEMENS 63s. I felt my injectors were way more comfy than just 16 psi. I am sure I had them around 20psi and 11 AFR ish. Want one of my logs? I have a couple I think.

Isn't there a calculation for fuel required and airflow? Were the heads ever flow tested? You could work out lbs of fuel at a certain psi and therefore what you are flowing vs. the advertised numbers rather than looking over various tunes.

I wish I tested my Vortecs from RPM to see what they actually flowed.
 

BMFB

Not to scale
Re: Fast Code59 users

Word to the wise. It was 100% worth the 40 bucks for an electric sunpro oil pressure gauge fitted to the fuel rail so I could always see my fuel pressure.
 

WyoSyclone

Active member
Re: Fast Code59 users

You have to be running into fueling issues because I went 12.4s on stock 32's with alky injection.

Even if you managed to think you got the right offsets I wouldn't trust the software to accurately calculate total injector duty cycle. Get a real number on fuel pressure while going down the track and see what that's doing, you might be seeinga big fall off. Do what you can to have it tuned on a track instead of the dyno.

The knock sensors on these trucks arnt great either. I'd be more interested in what you are seeing for afrs.

With Sean's better heads I like to go for 11.2 to 11.6 when not spraying.... spraying, 10.5 to 10.8 or thereabouts. We're getting up into the mid 11's spraying and that's where I get uncomfortable.

I know the injectors are saturating because I can see the ECM voltage drop right when they go past 93% DC and we start losing the ability to richen things up.

I've been talking to Sean and he's going to dig into the fuel system and get a gauge installed for another test.

I'm like everyone else....even with the cam, I can't see these injectors running out of steam the way they are (4700rpm/15psi). He does have the Racetronix harness installed but that doesn't mean much without a thorough inspection.

His Ty is way too nice and he's put way too much work into it to risk it on a bad fuel supply :)
 

Eric Sy GN

Donating Member
Re: Fast Code59 users

I guess another possibility is a contaminated wideband sensor, reading leaner than actual. Something else to look at anyway.
Eric
 

Aeroking

e.i.
Re: Fast Code59 users

I guess another possibility is a contaminated wideband sensor, reading leaner than actual. Something else to look at anyway.
Eric

x2. My PLX read 1.0 too rich consistently.

Is your boost multiplier table matched to your target AFR? They should match with respect to stoich
 

Sean Krupa

Moderator
Re: Fast Code59 users

Yes they are 60lb Siemens injectors. I bought them from Devils Own Chariot bein he went to E85.

I just replaced the WB o2 sensor last month to. I'm goin to verify the FP with boost shortly. The AFR is solid and safe, so it's reading fine, just I'm really high in duty cycle.

Thanks for all the help guys!
 

Sean Krupa

Moderator
Re: Fast Code59 users

Here's what I found guys.. I borrowed a Fuel pressure gauge with a long enough hose from work, taped it to the windshield.

Got it up to 14psi and Fuel pressure dropped to about 30-35psi or less. So I pulled back in my Driveway shut it off, and Fuel pressure dropped to 0 in about 2secs. I then started it back up, pulled in my garage, then it held Pressure. Sound like a Bad Regulator???

I smell gas from the Vac line to the Reguator as well. Could this be my issue? If so what's a good source to get a NEW one ASAP?

Thanks,
 

randy merritt

Donating Member
Re: Fast Code59 users

Here's what I found guys.. I borrowed a Fuel pressure gauge with a long enough hose from work, taped it to the windshield.

Got it up to 14psi and Fuel pressure dropped to about 30-35psi or less. So I pulled back in my Driveway shut it off, and Fuel pressure dropped to 0 in about 2secs. I then started it back up, pulled in my garage, then it held Pressure. Sound like a Bad Regulator???

I smell gas from the Vac line to the Reguator as well. Could this be my issue? If so what's a good source to get a NEW one ASAP?

Thanks,

Sounds like bad FPR. Problem solved.
 

Sean Krupa

Moderator
Re: Fast Code59 users

Crossing my fingers, just bought a rebuild kit from Accufab. I wish my dad still had that business :(
 

TYTILIDIE

METH HEAD
Re: Fast Code59 users

I had 60's on my TY runing a 67gtq and spraying meth I was at 60% DC at 20psi, sumfinz muffed up yo.
 

Sean Krupa

Moderator
Re: Fast Code59 users

Here's an Update..

Rebuilt my Accufab AFPR, didn't fix my Fuel pressure drop in Boost. At around 6-7psi Boost, FP rises to about 50psi, then anymore Boost than that, it drops to about 30-35psi FP.

Where Rob and I have the Tune setup, the Truck doesn't Bog or fall on it's face. AFR gauge reads Mid 10s and pulls like a animal.

I ordered a new Walbro 255 pump from Turbotweak in hopes it solves it. Also will be checking for kinks in the lines. Ughhhh :rant:
 

Quickstop [UK]

Combating adversyty.
Re: Fast Code59 users

Sean, surely at your stage, the next thing will be an inline Aeromotive or equivalent and a sumped tank. You're clearly going to do that anyway - may as well do it now :D

Looking forward to seeing some videos and numbers!
 

It's just a six

Super Member
Re: Fast Code59 users

Here's an Update..

Rebuilt my Accufab AFPR, didn't fix my Fuel pressure drop in Boost. At around 6-7psi Boost, FP rises to about 50psi, then anymore Boost than that, it drops to about 30-35psi FP.

Where Rob and I have the Tune setup, the Truck doesn't Bog or fall on it's face. AFR gauge reads Mid 10s and pulls like a animal.

I ordered a new Walbro 255 pump from Turbotweak in hopes it solves it. Also will be checking for kinks in the lines. Ughhhh :rant:
Any updates?
 

Sean Krupa

Moderator
Re: Fast Code59 users

Forgot about this Thread. Tracked it down to the Fuel pump. Replaced it with a new Walbro 255 from Turbotweak.

Runs Great with Proper fuel pressure under Boost and the Injectors aren't maxxed out anymore. Will be hitting the Track very soon.
 
Top