FAST-SP knock retard

rhaley

New member
Ron: how many jets you running on alky? Size?
I'm using single with a NOS "40". I haven't tested much with it, as I'm not yet encountering knock. Guess I'm just not trying hard enuff.

Roland, I have no idea on jet size. I am running SMC's standard Buick kit with one nozzle. If you want some knock, I can send you some Utah air to try.
 
G

Guest

Guest
If you want some knock, I can send you some Utah air to try.

<--------- Altho I really appreciate the offer, I'll pass! I kinda think that in time I'll eventually find knock on my own.
 
G

Guest

Guest
I broke down and bought an adjustable timing lite. With engine warmed up, timing trim set to zero, 16* crank reference and total advance of 46 degrees.............. lite set
at 46* was right on the zero mark!

I also checked for tdc when putting new motor together.

However, I notice that with 46-45 * timing at idle-cruise, and 14.7-14.6 AFR at idle-cruise, although the truck gets decent mileage, it isn't neck snapping like the lower timing, richer AFR was. So, back to the drawing board.........
 
Top