FAST XFI vs Accel Gen 7+

420

Broke Ass Racing
Was wondering if anyone out there had experience with both these systems on our trucks. I currently have a bank-to-bank F.A.S.T. setup on the truck, and want to step up to something a little more modern. I was leaning towards the XFI, since I know a few GN guys that are running them and loving it.

Any thoughts?
 

myclone

Donating Member
Re: FAST XFI vs Accel Gen 7+

420 said:
Was wondering if anyone out there had experience with both these systems on our trucks. I currently have a bank-to-bank F.A.S.T. setup on the truck, and want to step up to something a little more modern. I was leaning towards the XFI, since I know a few GN guys that are running them and loving it.

Any thoughts?

I'll let ya know when the XFI system and syty adaptor harness gets here and I can install it :tup: .
 

93 TY 2185

Donating Member
Re: FAST XFI vs Accel Gen 7+

myclone said:
I'll let ya know when the XFI system and syty adaptor harness gets here and I can install it
Ok.gif
.

I thought you were going with BS3 and the trans controller.
dunno.gif

What made you change your mind and go with the XFI System?
 

420

Broke Ass Racing
Re: FAST XFI vs Accel Gen 7+

Any one else with experience with either of these?
 

warmpancakes

New member
Re: FAST XFI vs Accel Gen 7+

Personally Id go with a gen 7 several guys here have had great success (Ed Hess) they make a seq dist for our trucks and I have buddies that work there. Plus my Syclone is in their catalog.
 

myclone

Donating Member
Re: FAST XFI vs Accel Gen 7+

warmpancakes said:
Personally Id go with a gen 7 several guys here have had great success (Ed Hess).

Only reason I went with fast is that I needed a PCM to run the trans too and fast offers both so rather than try to mate two controls from two diff companies I picked up the whole shebang. Easier troubleshooting, less headaches as far as compatibility, everyone that I know who I can pester with questions has the fast, etc.
 

myclone

Donating Member
Re: FAST XFI vs Accel Gen 7+

warmpancakes said:
Yep funny thing is the TCOM was developed Buy Accel and sold/given to TCI

I noticed that and you'd think they would at least relabel it with a FAST sticker or something :dunno:
 

ViciousV6

400HP/550FTLB
Re: FAST XFI vs Accel Gen 7+

Ed Hess is still running Accel Gen 7, we just installed a Big Stuff 3 on my truck and it is easier to learn and control then the Gen 7 unit. The trans controls itself i have B & M converter lock-up controller ( works good ) can control lock-up from 40-90 mph, but if you have the orginal DRAC off the Ecm it will still control the tranny as normal. The ECM never controlled the tranny. Vehicle Speed Sensor controls the lock-up.

Ralph
ViciousV6
 

warmpancakes

New member
Re: FAST XFI vs Accel Gen 7+

Yes but if you switch to a 4l80 you need a TCOM or BS3 or a piggy backed factory ECU and gen 7 will control TQ lock Up.
 
Re: FAST XFI vs Accel Gen 7+

despite comp owning fast and tci, and others, they are still acting as very independent operations.
this is generally for the best from a custoemr point of view.
i toss holley out in teh wind as the main reason not to take over your conquests but let them run themselves (meaning holley has ****ed up most every company it's touched)
 

myclone

Donating Member
Re: FAST XFI vs Accel Gen 7+

warmpancakes said:
if you switch to a 4l80 .

Bingo.. After rebuilding both units I cant immagine why anyone would put a 700 behind anything that needs dfi anyways.

80E = :tup: :tup:
700 =:screwy:
 

ed hess

race or get outta the way
Re: FAST XFI vs Accel Gen 7+

i dont have any idea what xfi is, and i dont care either, but i'm using dfi gen7 and not changin.

fwiw i have a spare gen7 ecm if you want to make me an offer in the classified.

ed
 

ed hess

race or get outta the way
Re: FAST XFI vs Accel Gen 7+

myclone said:
XFI= Extra Fabulous Intercourse (least thats what I was told ;) )

oh so instead of saying to the wife "hey you wanna go upstairs and play submarine races i should ask her what she thinks about a little xfi. lol :)

ed
 

420

Broke Ass Racing
Re: FAST XFI vs Accel Gen 7+

ed hess said:
i dont have any idea what xfi is, and i dont care either, but i'm using dfi gen7 and not changin.

fwiw i have a spare gen7 ecm if you want to make me an offer in the classified.

ed

Ed,

I remember reading somewhere on the board that the person who tunes your truck (Ralph?) made a statement before you switched from a F.A.S.T (bank to bank, or sequential, can't remember) to a Gen 7+ that you would pick up at least 75 hp in the swap. Can you ask him if he would make the same statement about going from XFI to Gen 7+?

- Matt
 

ed hess

race or get outta the way
Re: FAST XFI vs Accel Gen 7+

420 said:
Ed,

I remember reading somewhere on the board that the person who tunes your truck (Ralph?) made a statement before you switched from a F.A.S.T (bank to bank, or sequential, can't remember) to a Gen 7+ that you would pick up at least 75 hp in the swap. Can you ask him if he would make the same statement about going from XFI to Gen 7+?

- Matt

you got at all mixed up

i only used and will continue using gen7

harry anderson tunes my truck
ralph is viciousv6 here.
harry also did some big stuff tuning on ralphs truck
harry tunes all the ecm brands
harry is the man

harry knows a guy that took a bet from a tuner that the tuner told the guy he could make 75 more hp using gen 7 over fast. guy made the bet. they then changed from fast to gen7 and made like 120 more hp.
 

420

Broke Ass Racing
Re: FAST XFI vs Accel Gen 7+

Damn, I did get that all messed up. Disregard!
 
Top