Few Quick Questions

BlackTyphoon213

New member
Ok heres what i'm up against. I recently bought a 92 Ty with a rebuilt engine, has 77 miles currently not even broke in. I plan to do some mods with it which is where i need the help. I have religously read through these forums for hours and now i feel it is time to ask some questions of my own. First Chipping I like the thought of making my own. I have more time than money and a good knowledge about cars considering both my father and I are auto-techs. Whats better i like the Ultimate but the price is steep. would I be better fiddling around making my own, or is there anyone from the forums in the Mn area that deals with this. The truck is stock atm, I'm building a 3in downpipe for it at my shop. The turbo has been rebuilt which bring me to the boost gauge question, i have a acct with napa and can get a deal on autometer, like $62 for a 30psi ultralite or phantom gauge. I just removed the exhaust, all of it I dont plan on putting a cat back on and will run a straight through muffler. I have heard about boost spikes, but what is wrong with that, isn't more boost better? I heard a 4.3 could handle 30lbs of boost true? Well i hate to write a book here, but i have a lot of questions lol. I'm going to purchase a 3 bar map in the next few days and plan to run a vacuum delay valve to get 20lbs of boost or so. What else would i have to do to run 20lbs of boost, 3 bar map, anything more? The best thing would be for someone in my area to maybe call me and explain all this, or better yet, I could maybe meet them somewhere. Well i have more to ask but will leave it at this for now.
 

TYRODD

My ass. Look at it.
Re: Few Quick Questions

Good luck with the chip! :tup:

You NEED an adjustable fuel pressure regulator if you will run more boost than stock (14.7psi). You will go lean and play catch with your push rods :D . Same reason why overboosts are deadly, you engine will not be able to handle that force for long, if not at all. And no, your stock 4.3 will pop if you run 30 psi, you'de need serious mods/engine/$ to be able to run that. The stock turbo is really inefficient after ~20psi anyways, but thats besides the point :) .

Stock boost guages suck (horribly inaccurate), get a real guage ASAP.

There is TONS more info that you need to research, and this is the best place to find it :) . I would get very used to using the search function before modding up your truck at all.

HTH! & good luck :tup:
 

TYTILIDIE

METH HEAD
Re: Few Quick Questions

You cant jusut throw a 3bar MAP on there with out a chip. FIrst off, your chip has to be designed to run a 3bar. The whole point is htat the 3bar can read over 15psi. The ECM cant, this is why a 3bar chip is purchased. I would spend the money and get the chip and 3bar. Youre not going to be able to build a chip like the Ultimate for the same price Ild bet.

Mike
 

dgoodhue

BuSTeD 4.3
Re: Few Quick Questions

I guess the don't teach you that much about turbo and boost in Tech school. You are not going to be able run more than 17 or 18 psi of boost on 93 octane and it has to been running 100% to do that.

Overboost is bad in that if you set your boost for 17psi and it spikes to 23psi, its going to detonating all during the boost spike. If your rebuild is with factory pistons and rods, the motor won't last detonating. You don't want a vacuum delay, it will compound the overboost issue. If you want to run without a cat, you need an external wastegate or a different turbo.
 

BlackTyphoon213

New member
Re: Few Quick Questions

Ok so I'm guessing that there is no one in the Mn area, so does anyone have any used parts? Or will anyone make me a 3bar chip? I'd be willing to buy any of the parts listed above, fuel pressure reg, external wastegate, and i'd really be interested in a Alchy kit. If anyone has anyone of the for sale i would be interested. Also has anyone used the new Shell v-power? I'm sure its probably just another spiffy name for premium, nothing more than that, but let me know if it is.
 

dgoodhue

BuSTeD 4.3
Re: Few Quick Questions

I think Dig is somewhere up in MN. In terms of Chip burners, he is among the top if not the top person for tuners for stock ECM's.

Before you start throwing part at your Ty, you will need a scan tool, especailly since the motor has already been rebuilt. Usually their is a reason that happened, IMO that need to be address before any mods are added.
 

BlackTyphoon213

New member
Re: Few Quick Questions

I have a scan tool, its a Snap-on one my father owns his own shop. I've never had it on there yet, and honestly don't know how to tell if anything is out of place.
 

nallj92

Active member
Re: Few Quick Questions

chevk your PM, im in MN theres a good amount around, we can help ya out.

justin
 
Top