finding a live read ob1 scanner??

pearl91chevy

Donating Member
is there such thing?? im trying to turn the boost up with my ty, but everywhere ive gone "orielys, advance, and autozone", doesnt carry or even sell such a device.. they all have ob2 and the ob1's they do have is for just code reading.. I rented the 400$ scan tool from orileys thinking it'll give me live readings but thats not happening, only gives me codes which i have none... so how do i adjust the settings then on a velostyty chip?? do i have to resort to turnerpro??
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

i have datamaster and use it for logging runs.. not familer with being able to turn boost up with that program
 

2kwik4u

Resident slow guy
Re: finding a live read ob1 scanner??

Do you want to scan/datalog only, or do you want to edit the chip as well.

Code59.org <--- probably the best source of obd1 tuning/editing knowledge that I know of.
 

92TyLA

New member
Re: finding a live read ob1 scanner??

The scanmaster from turbo tweak is awesome, its a gauge and a scan tool.
Eazy as hell to use!!
 

gkrcr882

SyTyless......for now!
Re: finding a live read ob1 scanner??

Find a used Snap-On MT2500, aka "The Brick". Found one for sale locally with all the cartridges and adapters for $500.
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

Find a used Snap-On MT2500, aka "The Brick". Found one for sale locally with all the cartridges and adapters for $500.

Holy crap!!! I only expect to you use this coming weekend and maybe few times down road.. I really just need to learn how to use turner pro..
 

Eric Sy GN

Donating Member
Re: finding a live read ob1 scanner??

You can use any scantool/datalogger to adjust the parameters in the Velosyty chip, including Datamaster.

For Datamaster, key on/engine off, put Datamaster in monitor mode so you can see live data. Then follow the instructions that came with the chip.

Let me know if you have any questions.

Regards,
Eric
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

Wel I figured out how to get it changed.. Turned it to 18 and didn't see any difference.. Boost stayed right where it was before I did the Change at 15
 

ziembic

Donating Member
Re: finding a live read ob1 scanner??

Wel I figured out how to get it changed.. Turned it to 18 and didn't see any difference.. Boost stayed right where it was before I did the Change at 15

Do you have a 3 bar Map sensor? What has been done to this? A little detail goes a long way.
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

Yupp 3 bar. Velosyty chip. Adjust fuel reg. walbaro pump. Ac delete.. Motor is mostly stock but runs strong From fixing all the vac leaks. Also running 93oct and trans rebuilt with shift kit and stock stall... I have nearly no knock also.
 

Eric Sy GN

Donating Member
Re: finding a live read ob1 scanner??

If you can post or email a log, let's see what the boost duty cycle is doing.
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

My free trial of datamaster ran out so I can log anymore till I buy it. I disconnected the battery so settings when back to normal so I didn't cause any problems.
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

Ordering tts datamaster today And plan on getting some runs tonight and loaded up on here.. Besides watching for kr.. Anything else I should watch? Do I need to adjust the fuel pressure at all? Also whats some reasons why boost would stay at 15 and not go up to 18 like I changed it to
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

got some runs done.. for some reason the boost it shows on the datamaster is different then what it shows on my gauge.. i turned the target boost up to 18 exactly how it said in the book from turbotweek..
my gauge was reading anywhere between 15-20 but obviously its not saying that on the logs.. 1st 2 logs were just rolling runs, after sitting for a few minutes checking the runs and making sure my knock was alright i felt the engine stumble a sec, then pick up again and threw a check engine light for bein lean.. this was new.. drove it again for bit felt fine.. did another run from a stop, spun takin off but felt solid..

http://www.mediafire.com/?9v9fy6agv12uth9
http://www.mediafire.com/?p4z69lhzzttw5pk
http://www.mediafire.com/?q8eo11o737oll5l
 

pearl91chevy

Donating Member
Re: finding a live read ob1 scanner??

I've searched around a bit this morning but didn't find why my boost readings were so different between the dm and my gauge.. I seen a few threads some people had a similar problem but no fixes..
 

Eric Sy GN

Donating Member
Re: finding a live read ob1 scanner??

Looking at the logs, the boost is coming up to target (according to the MAP reading). But its dropping down on shifts and comes back up slowly. I can make some tweaks to the chip to help that.
Also looks like it needs a little more fuel at idle, assuming the O2 sensor is good.
Send me a message if you want to work out the details.
Regards,
Eric
 
Top