first datamaster run, file uploaded

TNPhoon

1of28
Re: first datamaster run, how to upload?

Re: first datamaster run, how to upload?

Not sure if that is an option with the attachments on the board, but worst case you can upload it to google drive or dropbox or whatever other file sharing site and post the link here. Make sure you make the file public or it has a public link option.
 

The Dread Pirate Fisher

Donating Member
Re: first datamaster run, file uploaded

k try that.

odd issue

i plug the ALDL in, then start the car and open up and record... the damn idle goes from 700 to 1250 and stays there... only after i unplug it, it comes back down... is that normal?
 

The Dread Pirate Fisher

Donating Member
Re: first datamaster run, file uploaded

60 views no comments?

I think I figured out why I can only get 10psi and 80% TPS, I can't get the throttle to open all the way, I have some slack in the cable, so much that I can take the cable off the cam without rotating the linkage
 

Quickstop [UK]

Combating adversyty.
Re: first datamaster run, file uploaded

On the ALDL cable, there is a resistor. If that is switched the wrong way, can cause high idle issues.

HTH...
 

The Dread Pirate Fisher

Donating Member
Re: first datamaster run, file uploaded

Oh wow, didn't know that. Yeah it kept on doing it even after I disconnected, stopped the car and restarted, still the same, until I disconnected the battery, then it acted normal.

So what's the switch on the moates supposed to be on?
 

Don W.

Stab it and steer it
Re: first datamaster run, file uploaded

I don't know what difference it makes but go into DM Setup and change to Truck /w auto trans. Then get the throttle fixed. Then post a new log.
 
Top