First DM run

Houseofperformance

switchhappy!!!
Last weekend I recorded a run with my laptop for the first time.I would be happy if someone with a little more knowledge could take a look at it.I don´t know how to post it here but I could send it per e-mail.

My build is:
stock engine
PTE 44 + 3" DP and Exh.
walpro 255
AFPR set to 49 psi
Ultimate v9 for stock inj.
running 100 okt. pumpgas

things I noticed in the file:
my AF target never goes to 14.7 it stays at 10
my o2 at wot are real low ~ 750-800
spark retard only kicked in once during the whole run. ( ~ 20 miles)

TIA
Joerg
 

93 TY 2185

Donating Member
Re: First DM run

lowrider said:
Last weekend I recorded a run with my laptop for the first time.I would be happy if someone with a little more knowledge could take a look at it.I don´t know how to post it here but I could send it per e-mail.

My build is:
stock engine
PTE 44 + 3" DP and Exh.
walpro 255
AFPR set to 49 psi
Ultimate v9 for stock inj.
running 100 okt. pumpgas

things I noticed in the file:
my AF target never goes to 14.7 it stays at 10
my o2 at wot are real low ~ 750-800
spark retard only kicked in once during the whole run. ( ~ 20 miles)

TIA
Joerg

Email it to me I'll host it for you.
BTW
O2 values of 750-800 are very lean.
Get a Wide Band and you will know for sure.
 

93 TY 2185

Donating Member
Re: First DM run

lowrider said:
mail is sent - thanks a lot.

http://www.northeastsyty.com/videos/TY2185_NESYTY_Vids/DataMasterFiles/3lowrider%20.uni
You have better richin that fuel up a little before doing another 120+MPH Blast.
icon_eek.gif
 

93 TY 2185

Donating Member
Re: First DM run

lowrider said:
thanks for the hint - lets pretend is was on the Autobahn.To what level can I rise my FP?
I would start by raising it to 55PSI and then back down from there.
Better rich than lean. If you still can not get your O2 up to 930 to 950.
You may need a new O2 sensor. Or you may need to go up to 50# injectors and an updated Ulitmate made for 50#.
Is there someone near by with a WideBand?
Maybe someone else will chime in on this.
2cents.gif
 

JSM

Active member
Re: First DM run

If it is that lean, you will have issues soon if it continues.

could be a fuel pump also being weak, clogged filter, bad FPR.
 

dgoodhue

BuSTeD 4.3
Re: First DM run

lowrider said:
my AF target never goes to 14.7 it stays at 10

You probably have programing for a WBo2, since you don't have on connected to the Ecm it just defaults to 10:1, its a junk reading in the stock ECM anyways, when it does work, (it doesn't calculating or measuring, its just a look up table)

As for low O2 mV it could be a dying fuel pump as well.
 

Houseofperformance

switchhappy!!!
Re: First DM run

The fuelpump is a fairly new walpro and so is the filter.I already have the Ultimate for the 50# + Injectors from RPM, but not installed yet. I don´t have anybody with a WB O2, but I now consider buying one myself.
I also have a hard time spooling the 44, so I bought a 2800 stall conv. wich I have to install yet.The truck has a little off idle hesitation around 1500rpm wich I can´t get rid off that might also ad to the spooling issue.
 
Top