Fitting ATR downpipe with Stock headers

Wildeone5

New member
I have a chance to buy a used ATR downpipe and ATR external wastegate. I currently have a stock turbo and headers. I want to know if this will fit or not?

Also, is there a way to mount a K&N airfilter to the end of the stock turbo?

Another question, I don't live in a area that requires emissions control and the truck does not have a cat, do I need the EGR. I have run my 93 lightning without one for years, but it is always kicking up codes and causing issues. What happens on these trucks if you take them off.

Thanks, John Wilde
 

12secondSY

Syty Killer :(
Re: Fitting ATR downpipe with Stock headers

Wildeone5 said:
Another question, I don't live in a area that requires emissions control and the truck does not have a cat, do I need the EGR. I have run my 93 lightning without one for years, but it is always kicking up codes and causing issues. What happens on these trucks if you take them off.

Thanks, John Wilde

You dont need the EGR, you can get blockoff plates from some of the vendors on here.
 

jbone

Member
Re: Fitting ATR downpipe with Stock headers

im not 100% sure but I dont believe the atr dp matches up to the stock turbo
 

SYO237

SyTy Registry
Re: Fitting ATR downpipe with Stock headers

12secondSY said:
You dont need the EGR, you can get blockoff plates from some of the vendors on here.

You also need to have your chip reprogrammed so it doesnt see the EGR anymore and doesnt throw codes. There are vendors on here that can offer that service.

I dont run EGR or any exhaust at all. Open 3" downpipe dumped straight to the ground.
 

Wildeone5

New member
Re: Fitting ATR downpipe with Stock headers

Thanks guys! So no one is sure about the downpipe and the headers and turbo?
 

12secondSY

Syty Killer :(
Re: Fitting ATR downpipe with Stock headers

SYO237 said:
You also need to have your chip reprogrammed so it doesnt see the EGR anymore and doesnt throw codes.
oops, forgot to mention that. answered in a hurry, i was leavin. well now you know anyways :D
 

ghettosled

SYTY SUPERSTORE
Re: Fitting ATR downpipe with Stock headers

to answer your question, no the downpipe will not work. You need an aftermarket turbo. But it will work with stock, ATR, or RPM headers, if you have the garret turbo.

As for the K&N, use the orange transition hose and build 3" ducting onto it.
 
Top