free scan question

tallcoolone

New member
This is concerning Free Scan/by A. Whittaker... Can you use datamaster cable to operate program..Has anybody had luck using this program.After downloading program, I tried running program/didn't work/ any tips on getting program working..I appreciate any help..thanks
 

Tooky

Serious about performance
YES! I have! The trick is to get it setup up, and then make sure you have the correct ECM setup, (I think the selection is GM 610B if memory serves correctly). Then choose Interact mode from the options. Finally the real trick. Hit "Force Data" three times in a row quickly! It must be three times, one right after the other, and don't be a slouch about it! That's the only way I can get it to work and my tips worked for another SyTy member as well. Watch out, make sure your units of measurement are Celsius because the FreeScan revision I used would show bogus data in Fahrenheit mode. I haven't heard of any updates to the software but I last checked the website about 6 months ago..

PS: I do like his simulated gauges on the software, very nice! But for anything else including doing real datalogging, DataMaster is King..
 

JoeLutz

New member
yes use the same cable. It can be a bitch getting it to "Force Data" though. Like Tookycat said try hitting it three times fast. then check the dashboard to see if its working. I was able to record data using the coma seperated value button and then graph it in excel.
 

tallcoolone

New member
I know that this topic was covered a while ago, but do you hit restart/comport before you force data/interact? When it was said hit it three times does that mean 'click it" three times or hit "enter"--I am confused since I could not get to work... Thanks for ny advice..
 

Bill Z

Donating Member
Cables for Freescan

Cables for Freescan

I am a new guy here and a new Typhoon owner. I used the ALDL to PD interface cable on Andy's web page. Built it using parts I ordered from the internet. I had the same software problems you mentioned above getting the software to work but the cable works great.

I just thought I would mention an alternate to a purchased cable.
 

TheObiJuan

Active member
anyone using this now with anything new to contribute?
any new formed opinions or revisions worth mentioning?

i really like this!
freescan_dash.gif


this screen reminds me of barry's setup:

freescan_dat.gif
 

Sy#26

New member
Just for another alternative, I've been using EFIlive by Paul Blackmore, guy in NZ - he's got a dashboard display, but the graphs are far better for data analysis:
aag.sized.jpg

aaf.sized.jpg
 
Top