Freeze Plug change, PITA?

live1053rulz

Nor Cal SyTy
Looks like I'm going to have to change out my freeze plugs pretty soon here, better get it over with before I loose all my coolant one day. Have you guys found this to be a big pain or is it something I can probably do alright? I'm thinking about just taking it to my Dad's mechanic for this job, he's good. Also, I guess a part number for freeze plugs for these things if anyone has it handy?
 

jwaller

Evil Genius/SyTy Guru
Re: Freeze Plug change, PITA?

ya it's a huge PITA esp if you plan on doing them all. remember there are 2 behind the flexplate. I've seen guys just shove the old ones in the block and use those rubber plugs as a patch job till the eng needs rebuilding.
 

sleepy

Member
Re: Freeze Plug change, PITA?

VERY LARGE PITA - you can do a couple with the engine in - but if you are leaking on all (not very likely), take the engine out - that's the easy way...
 

typhoon92

Donating Member
Re: Freeze Plug change, PITA?

live1053rulz said:
Looks like I'm going to have to change out my freeze plugs pretty soon here, better get it over with before I loose all my coolant one day. Have you guys found this to be a big pain or is it something I can probably do alright? I'm thinking about just taking it to my Dad's mechanic for this job, he's good. Also, I guess a part number for freeze plugs for these things if anyone has it handy?

I have new set of freeze plugs that I bought from turbo time that i'll sell you..
 

MrNurse

i'm no homo
Re: Freeze Plug change, PITA?

changing the plugs are not that bad, its getting to them that is the hard part.
 

live1053rulz

Nor Cal SyTy
Re: Freeze Plug change, PITA?

Cool, thanks guys. I'm thinking it's just the front two that I'll need to do. Probably not quite of big as a job in this case. I'll let you know what I end up doing and if I need them from ya typhoon92.
 

jwaller

Evil Genius/SyTy Guru
Re: Freeze Plug change, PITA?

freeze plugs shouldnt cost you more than a few dollars at any parts store.
 

bezerk

New member
Re: Freeze Plug change, PITA?

and taking the engine out is a piece of cake...only a few hour job...you got to learn it sooner or later :)
 

mmp142965

say it like you spell it!
Re: Freeze Plug change, PITA?

just curious, what is the standard procedure for removing the plugs???
 

DynaGlide

Ton-Eighty
Re: Freeze Plug change, PITA?

I hear there's a tool for removing them. However, I usually use a piece of bar stock, a big hammer, and a pair of channel-locks.
 

mmp142965

say it like you spell it!
Re: Freeze Plug change, PITA?

if you are doing this while the motor is still in the truck, is there a trick to keeping the freeze plugs from popping into the crank case etc?
 
Top