front hubs, Maybe?

vinnieTy

TY # 1889
Well let me start off by saying i love having the wide zr1 front rims 9.5 to be exact but what a killing it is for me to not cause an accident when i am driving. When i hit a crack in the road the truck just takes off left or right which is so dangerous. The wheel alignment is dead center and the entire front end is new except for the hub bearings. When i jack up the front and check to make sure everything is fine i came a cross something weird. If you put your hand on the drivers wheel at 12 and 6 oclock the wheel has a slight move that you actually cant see becasue it is so minor but feel it. The passenger wheel is solid both ways. The only thing i can think is the hub bearing but will this cause the issue to pull left and right that hard. I know from my experince you will get more of a pull becasue of the wider wheels but i cant get over how dangerous it is.

Is others also experiencing this issue and what have you done to resolve it?

THanks
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: front hubs, Maybe?

I had the same problem - I converted to coilovers and rebuilt EVERYTHING in the frontend with poly bushings. Nothing was left of the old steering and suspension. Also installed a Rancho steering stabilizer kit that helped alot. My truck is very stiff and almost darty with the ZQ8 steering box and Renz shaft but it doesn't take off on it's own anymore. I'll be at Jimmy's BBQ in May if you wanna take it for a test drive.
 

vinnieTy

TY # 1889
Re: front hubs, Maybe?

Boostedpimp said:
I think your best bet is the Rancho steering stabilizer
Sorry forgot to state that but i already have one on the truck. It was there when i got it.
 

TurboTony

Active member
Re: front hubs, Maybe?

What angles was the alignment set to.

A bit more caster over the stock specs really helps out the "darting" feeling. If memory serves I set mine to around 4.5 degrees.

Tony
 

James Thomas

"NO CLASS"
Re: front hubs, Maybe?

Sounds like you need to check your suspension and repleace the required parts, not just throw new add on stuff at it. If the components are in good condition (stock A-arms or coil over), your alignment is correct and you don't have any frame or "tweeked" parts, you shold not have this problem. I had a simular problem and one tie rod end and a pitman arm later..... no more problem. That was with stock wheels and rubber, wider wheel and tire combo will just amplify a small problem and make it feel bigger and faster. I bet you have somthing that is starting to get loose and needs attention.

_________
James
 
Top