Fuel Pressure guage hook up

Ok, i got my piller pod in rom Lotek and i got a boost guage and fuel pressure guage and a pyro guage. I have all of them hooked up but i cant find a good spot to hook up the fuel pressure guage? IS there any other location besides the fuel rail schrader valve??

Also my guage is an electric autometer one, so i believe the sender is 1/8 NPT, if the fuel rail is the best place where can i get an adaptor to hook up to the fuel rail, that will have a female 1/8 NPT for my sender??

Thanks
 
Re: Fuel Pressure guage hook up

Thanks for that, but do you know if the kit that RPM sells for 35 bucks will have the 1/8 NPT female fitting on it?

Is AR Autosports still around, none of the pics worked in that thread and i dont have the stock fuel lines under my Ty, just -10 braided to the junction by the transfer case.
 

Don W.

Stab it and steer it
Re: Fuel Pressure guage hook up

Yes, and it's long enough to lay on top of the brake booster between the booster and the firewall with all the other stuff that's there. At least that's what I did.
 

SY2932

Administrator
Re: Fuel Pressure guage hook up

HotRodV6 said:
Thanks for that, but do you know if the kit that RPM sells for 35 bucks will have the 1/8 NPT female fitting on it?

Is AR Autosports still around, none of the pics worked in that thread and i dont have the stock fuel lines under my Ty, just -10 braided to the junction by the transfer case.

Heh, you are showing your "age" on here ;) . AR (Atomic Rooster) Autosports is what Mike Lee's company used to be called. Goes by Race Proven Motors (RPM) now... Been using his remote fuel pressure sending line (attaches to the shrader valve on the fuel rail, be sure to REMOVE the core if you get it) since 2001 with no problems.
 
Last edited:
Re: Fuel Pressure guage hook up

SY2932 said:
Heh, you are showing your "age" on here ;) . AR (Atomic Rooster) Autosports with what Mike Lee's company used to be called. Goes by Race Proven Motors (RPM) now... Been using his remote fuel pressure sending line (attaches to the shrader valve on the fuel rail, be sure to REMOVE the core if you get it) since 2001 with no problems.


Well im not a total newb, but just when you think you go these trucks figured out im scrathing my head.

Thanks i guess the RPM kit is the way to go.
 
Top