Fuel!

[BMFB]

looking to put on of those walbro pumps on my truck, wondering where i should mount that badboy, it anyone out there had any advice

ive mounted a couple pumps like this before and i always did it at random points along the frame, and it worked well as far as priming and drawing fuel from the tank though the stock pump, was hoping it would be the same here

also, gonna need a pressure regulator, not sure what kind i should get, i heard that some off the GN's would work well, but i was thinking there was another route

 

[sharkbait]

Re: Fuel!

the stock pump is in-tank. they do make a external walbro you could mount on the frame. but you should remove the old pump in the tank. and if your gonna remove the old pump you might as well put the new one back in the tank. if its a DD youll want it to be quiet anyway. just my two cents.

 

[NecroWolf]

Re: Fuel!

mount it under your seat and there you go, now you have one of those fancy heated massage seats

 

[BoostedSUV]

Re: Fuel!

Walbro 255 intank pump is fine for most applications and I just picked up and AFPR from RPM. You will alo need a gauge adapter for the fuel rail for a mechanical gauge or for a sending unit for an electrical gauge

 

[Aeroking]

Re: Fuel!

the common Walbro 255 pump is a direct replacement for the stock pump, it mounts in the stock location (inside the gas tank), not on the frame rail.