Gonna buy a chip.

live1053rulz

Nor Cal SyTy
So I'm finally gonna have to get a chip. Can't stand it any longer. I've gone through searches and read for hours. Just want to make sure you guys think the Ultimate is the way to go (if I can still get one?). I recently did the Walbro, have AFPR, just little things pretty much. 3 bar and Razor alky is on the way. Gotta get a chip. Was just planning on going to SyTychips and placing an order for the Ultimate 50# and also getting some 50#ers. Anyone think this is a bad idea for any reason. Guess I should force myself to get a Datamaster by now too.
Thanks for your help,
Steven
 

qbnkiller

Conflaguration Specialist
Re: Gonna buy a chip.

..or Nolans tune..both are very good...both have very fast trucks out there...
 

dgoodhue

BuSTeD 4.3
Re: Gonna buy a chip.

IMO all of the 3 bars chips are good. They were all done by enthusiasts and not some churned out cookie cutter Mass market chip.
 

live1053rulz

Nor Cal SyTy
Re: Gonna buy a chip.

Thanks guys, I'll go with something custom. Would you guys advise 50#ers with a stock turbo? Or has anyone been successful with a Phil Long chip with a stock turbo?
 

Mephisto

These trucks are cursed
Re: Gonna buy a chip.

you'll need the 3bar before you can install the ultimate. not sure about the phil long chip though. you can get the 3bar from RPM $65 or somewhere around there.

i keep thinkin your location is santa clarita, i was just thinkin i could bring my ultimate by so you could try it out before ya get one. haha oh well.
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Gonna buy a chip.

couldn't you get a p.long chip for stocker part and then when you have performed upgrades can't you get it custom burned again?
 

live1053rulz

Nor Cal SyTy
Re: Gonna buy a chip.

Yep, that's what I'll plan on doing, sorta. Gonna have to go 50#ers, and should suffice with stock turbo and converter until I can manage to do those.
 

JB's Red Ty

Still Green
Re: Gonna buy a chip.

Let me know when you get your stuff...I want to check it out/provide an extra set of hands...

Jack
 

qbnkiller

Conflaguration Specialist
Re: Gonna buy a chip.

Nolan charges 1 fee, and continuously updates your S/W as you improve your truck. The 50's with stock turbo will work well...think of it this way...when you upgrade your turbo, you'll have plenty of injector already. The 3BAR map is just a good idea if you want to get more performance out of your current turbo setup and new turbo if/when you get it.

Alex
 

live1053rulz

Nor Cal SyTy
Re: Gonna buy a chip.

Cool guys, thanks. I guess I kinda couldn't stop, ended up spending up about 2 grand. I'm out of town again for the weekend, but I should see most of the stuff by the beginning of next week. Ended up getting the 50#ers from a member on the board, 50# Phil Long chip from Turbotime, 3 bar map and Razor alky from Detroit Turbo, and I picked up a new RPM A2A kit from a member on the board, but I'm not sure how long before I'll be ready/able to install that. The truck just started to adle kinda funny, I think I better go through and check my ignition (wires + plugs mainly) and maybe look over/replace my vacuum lines. I'll let you know when I get it all in Jack, hope you're doin' well.
 

mrweelr

New member
Re: Gonna buy a chip.

Nice! Looks like I better watch out for a certain red Ty running around town now, he he ;) Dude, if you want help installing any of that $hit, let me know. You're gonna love the new goodies :tup:
 

live1053rulz

Nor Cal SyTy
Re: Gonna buy a chip.

Hehe, you probably won't have to worry for awhile. I just hope the thing'll run ok. It's not up to par for a stocker right now. I'll let you know when everything comes in. I hate asking for help, but I'll probably be desperate sooner or later. Thanks, and I'll be contacting you.
 

mrweelr

New member
Re: Gonna buy a chip.

When you do the A2A, you're going to want to ditch the stock clutch fan setup and go with RamCharger electrics. Just order the fan/shroud assembly...you don't need the $100 harness. Works like a champ, nice and quiet, and you won't have to worry about losing a finger when you're working under the hood. I have a spare Bosch relay and we can wire it up on low speed. I have mine setup this way and coolant temps stay between 160-170F no matter what. I'm assuming you already have a 160F thermostat in there? Let me know when you start into it.
 

live1053rulz

Nor Cal SyTy
Re: Gonna buy a chip.

Oh cool, I was wondering what to do about that. Ya think that's better than the Volvo fan thing people have been doing? And yup, I did the 160*.
 

mrweelr

New member
Re: Gonna buy a chip.

I can't speak for the Volvo or Mark 8 fans. I decided to go with the ramchargers setup after reading nothing but good things about them on the GN and SyTy boards. I have Datamaster too if you want to figure out why your truck is "slow" :roll:
 

live1053rulz

Nor Cal SyTy
Re: Gonna buy a chip.

Oh boy, that would be great. I know it's got issues. It overboosts; the peak memory on my autometer gauge showed 22 psi, not good, cuz it wasn't pullin hard. I need to check my plug wires, vacuum lines, and see if my afpr is working properly. Don't know what else it might be, could check my coil too I guess. But that would be awesome to do when you have a chance.
 
Top