Gonna buy a chip.

QUICK STORM

B.A.M.F. BMW Tech
Re: Gonna buy a chip.

live1053rulz said:
Oh boy, that would be great. I know it's got issues. It overboosts; the peak memory on my autometer gauge showed 22 psi, not good, cuz it wasn't pullin hard. I need to check my plug wires, vacuum lines, and see if my afpr is working properly. Don't know what else it might be, could check my coil too I guess. But that would be awesome to do when you have a chance.

check your boost solenoid
 

Don W.

Stab it and steer it
Re: Gonna buy a chip.

I have a question that fits in here. Won't 50# inj give a much lower duty cycle (as read by datamaster) hence better control? On a stock motor, with a chip and 3bar, as more boost is dialed in, won't the stock injs begin to not flow enough even at elevated fuel pressures?

Seems obvious but wanted to post the q anyway.
 

mrweelr

New member
Re: Gonna buy a chip.

Yup. I just looked at a bunch of my "stock injector" DM files. Injector duty cycle value ranged between 70-120 or so at 100% TPS with 17-18psi boost. I'll take some new DM readings tomorrow with the new setup...been meaning to do this for a while, but the truck runs so strong, I haven't messed with it for a while. I'll let you know what the values are with the 50# injectors and Phil Long chip.
 
Top